Milwaukee
Milwaukee Tool (6) CUT LEVEL 5 PROTECTIVE SLEEVES - 16"
- SKU:
- MLW48-73-9050
- Availability:
- Usually Ships Same Day
- Weight:
- 0.29 LBS
Description
DUTY®
16-Inch Cut A5
Protective Sleeves
One pair of cut-resistant arm sleeves with a tapered fit, thumb loops and moisture-wicking fabric.
Product Overview
These 16 in sleeves use HPPE/polyester knit for ANSI A5 cut protection and UPF 50+ coverage.
The tapered fit, silicone bicep band and thumb loop retain coverage; wicking aids quick drying.
- Secure fitTapered, silicone-band fit.
- Wrist coverageElastic thumb loop.
- Moisture controlWicking helps dry quickly.
- Sun coverageUPF 50+ fabric rating.
Technical Specifications
- Sleeve length
- 16 in
- ANSI cut level
- A5
- EN 388 rating
- 3X42E
- Knit gauge
- 13
- Liner
- HPPE / polyester
- UPF rating
- 50+
Choose the Correct Fit
Check arm coverage while reaching and bending, with gloves and other PPE in place. Choose a length that avoids exposed gaps.
Match ANSI cut resistance to the workplace hazard assessment. Cut-resistant sleeves are not cut-proof and do not establish electrical, flame or needle protection.
Installation & Care
Keep the fabric close fitting and away from rotating machinery or other entanglement hazards. Stop using a sleeve that is torn or badly worn.
Follow the care label: warm wash with mild detergent, no bleach, then line dry. Inspect the fabric and retaining bands before reuse.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the required cut rating, arm coverage and task. We can help compare sleeve lengths and configurations without substituting a lower protection level.
Important Product Questions
Are these sleeves cut-proof?
No. They reduce cut risk within their rated performance. Use the protection selected by the task’s hazard assessment and avoid deliberate blade contact.
How many pairs are in this model?
The manufacturer lists this exact model as one pair.
How do I wash them?
The manufacturer specifies warm water at 105°F, mild detergent, no bleach and line drying. Follow the instructions on the supplied sleeve label.
