Milwaukee
Milwaukee Tool 6" 8TPI The TORCH for CAST IRON with NITRUS CARBIDE 5PK
- SKU:
- MLW48-00-5561
- Availability:
- Usually Ships Same Day
- Weight:
- 0.50 LBS
Description
DUTY®
6 in NITRUS
Cast Iron Blade
A 6-inch TORCH blade with NITRUS carbide teeth for cast iron and demanding thick-metal cuts.
Product Overview
The 6 in blade reaches into cast-iron removal work. Check clearance through the saw stroke.
A tall body supports the cut, while large gullets help clear material from the tooth line.
- NITRUS carbideFor hard cast iron.
- Thick-metal useCuts stainless and black pipe.
- Tall blade body1-inch blade profile.
- Large tooth gulletsHelp clear cut material.
Technical Specifications
- Blade length
- 6 in
- Tooth material
- NITRUS carbide
- Body height
- 1 in
- Tang
- 1/2 in universal
- Gullets
- Large
- Application
- Cast iron / thick metal
Choose the Correct Fit
Identify the metal and its wall thickness before choosing a blade. Secure the work and support the offcut so it cannot pinch the blade.
For pipe removal, isolate and drain the service first. Verify support and the condition of the pipe before cutting.
Installation & Care
Disconnect power before changing blades. Follow the saw’s clamp instructions and check that the blade is secure.
Let the blade cool before handling. Clear debris and replace blades with cracks, bends or damaged cutting edges.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a blade? Tell Willy the material, its thickness, your saw model and available cutting clearance.
Important Product Questions
Is this only for cast iron?
No. The listed applications also include stainless steel, black pipe and angle iron. Confirm the exact material and cutting conditions before use.
How much cutting depth does the blade length allow?
Nominal blade length is not a cutting-depth rating. Choose enough reach to extend beyond the work through the full saw stroke, and leave clearance behind it.
Can I cut a pipe while it remains in service?
Do not start until the service is safely isolated and drained. Identify its contents, release stored pressure and support the pipe and offcut.
