Milwaukee
Milwaukee Tool 54 ft. Adhesive Caution Tape
- SKU:
- MLW76-0050
- Availability:
- Usually Ships Same Day
- Weight:
- 0.45 LBS
Description
Bring the warning onto the surface.
76-0050 — 2 in. x 54 ft. Black and Yellow Adhesive Marking Tape. Highlight steps, walls and obstructions with black-and-yellow adhesive marking tape, supplied in a 2 in. x 54 ft. roll for solid surfaces.
A VISIBLE CUE WHERE IT MATTERS.
MARK IT.
SIGNAL RISK.
Draw attention to an edge or obstruction without hanging a separate line. The 6 mil PVC film has a pressure-sensitive adhesive on one side, creating a surface-applied warning rather than tie-off tape.
Mark solid-surface hazards
- Highlight steps with contrasting stripes.
- Draw attention to low overhangs.
- Mark obstructions on suitable solid surfaces.
- ft.Adhesive tape roll
- 54
- Model
- 76-0050
- Tape size
- 2 in. × 54 ft.
- Color
- Black/yellow stripes
- Construction
- 6 mil PVC film
BEFORE YOU ORDERCheck the surface.
Plan the warning marks.
Choose 76-0050 for a striped adhesive marker rather than tie-off tape. Measure the surfaces, allow for trimming and check adhesion on the actual substrate before applying the 54 ft. roll.
Adhesive marking tape is a visual warning, not a non-slip treatment, physical guard or substitute for protective measures.

Ask Willy: Adhesive or tie-off tape?
Describe the surface, hazard and marking length. Willy can help distinguish this adhesive striped tape from printed barricade tape and non-adhesive flagging before you choose.
Important Product Questions
What are the dimensions and material?
Empire 76-0050 measures 2 in. wide by 54 ft. long. It uses 6 mil PVC film with a rubber-based pressure-sensitive adhesive on one side and a black-and-yellow striped warning pattern.
Is this the same as non-adhesive barricade tape?
No. This tape is designed to adhere to solid surfaces. Barricade tape is used as a suspended visual warning line, while plain flagging is tied onto supports to mark reference points.
Does this tape provide slip resistance?
No slip-resistance rating is specified for this product here. Treat it as a visual marking tape, not an anti-slip surface treatment, and use the separate traction or guarding products required by the application.