Milwaukee
Milwaukee Tool 5/8"Female - 1-1/4"Male Core Bit Adapter
- SKU:
- MLW48-17-6008
- Availability:
- Usually Ships Same Day
- Weight:
- 2.80 LBS
Description
DUTY®
5/8" to 1-1/4"
Core Bit Adapter
Adapt a core-drilling connection using this 5/8-inch female to 1-1/4-inch male adapter.
Product Overview
The two connection diameters let compatible core-drilling components mate through one adapter.
A stepped body provides flat tool-contact faces; Milwaukee calls for anti-seize on the threads.
- Female side5/8-inch interface
- Male side1-1/4-inch interface
- Thread preparationAnti-seize before use
- Tool accessFlat-sided body section
Technical Specifications
- Female interface
- 5/8 in
- Male interface
- 1-1/4 in
- Bit fit
- Thread-matched core bits
- Thread prep
- Anti-seize lubricant
- Tool flats
- Flat-sided body section
- Body profile
- Stepped
Choose the Correct Fit
Check both connection diameters and the mating thread pitches before ordering. The listed diameters alone do not establish compatibility with every core drill.
Apply anti-seize lubricant to the threads before use. Keep the mating surfaces clean so the adapter can seat as intended.
Installation & Care
Inspect the adapter and mating threads for damage before assembly. Use the flat-sided section when the equipment instructions call for wrench assistance.
Follow all core drill and bit instructions for support, operating mode and cooling. Confirm the complete setup before starting a hole.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the drill spindle connection and core bit thread to help confirm both sides of this adapter.
Important Product Questions
What are the two connection sizes?
Milwaukee identifies a 5/8-inch female interface and a 1-1/4-inch male interface.
Are thread pitches specified here?
The verified manufacturer listing gives the two diameters but does not establish both pitches. Confirm the complete thread specifications on the mating equipment before ordering.
How should the threads be prepared?
Milwaukee directs users to apply anti-seize lubricant to the threads before use.
