Milwaukee
Milwaukee Tool 5/8" x 10" x 12" Carbide Hammer Drill Bit with POWER TIP
- SKU:
- MLW48-20-9041
- Availability:
- Usually Ships Same Day
- Weight:
- 0.50 LBS
Description
DUTY®
Carbide Hammer
Drill Bit
Choose 5/8 in carbide drilling for concrete, brick and block with a hammer drill/driver.
Product Overview
Choose 5/8 in holes with 10 in usable reach. Leave clearance for the bit’s 12 in overall length.
Ground carbide helps start in concrete, brick and block. Wide flutes carry drilling dust away.
- Carbide tipCuts into demanding materials.
- Accurate startsGround cutting edges.
- Tool fitThree flats improve chuck grip.
- Wide flutesClear dust and limit heat.
Technical Specifications
- Diameter
- 5/8 in
- Usable length
- 10 in
- Overall length
- 12 in
- Tip material
- Carbide
- Tip design
- Precision ground
- Shank
- 3-flat Secure-Grip
Choose the Correct Fit
Follow the fastener instructions for hole diameter, depth and cleaning. Check for concealed services before drilling.
Use a compatible hammer drill/driver. Confirm that the chuck accepts the shank before loading the bit.
Installation & Care
Disconnect power before changing bits. Secure the work and use the dust controls required for the material.
Let the bit cool before handling. Inspect the carbide and remove chips or dust with the tool stopped.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help selecting a carbide bit? Tell Willy the material, fastener, hole depth and tool connection.
Important Product Questions
Can I fit this in an SDS rotary hammer?
This bit uses a three-flat drill-chuck shank. It does not fit an SDS holder directly; use a compatible hammer drill/driver.
Which materials is it designed to drill?
Use it for concrete, brick and block. Match the diameter and hole preparation to the anchor or fastener instructions.
Does overall length equal usable reach?
No. The bit is 12 in overall with a 10 in usable section. The overall dimension includes the shank.
