Milwaukee
Milwaukee Tool 4-3/8" HOLE DOZER Bi-Metal Hole Saw
- SKU:
- MLW49-56-9648
- Availability:
- Usually Ships Same Day
- Weight:
- 1.00 LBS
Description
DUTY®
HOLE DOZER
Bi-Metal Hole Saw
Cut 4-3/8 in openings in metal, wood, drywall and plastic with this HOLE DOZER saw.
Product Overview
The 4-3/8-inch bi-metal cup cuts to 1-5/8 inches deep for general-purpose installation.
The 3.5 TPI teeth work with a thermoset coating to reduce drag. Slots give access to the cut plug.
- 3.5 TPI teethFor general-purpose cuts.
- Thermoset coatingHelps reduce cutting drag.
- ALL-ACCESS slotsAid trapped-plug removal.
- Pilot visibilitySlots reveal the start.
Technical Specifications
- Hole diameter
- 4-3/8 in
- Cutting depth
- 1-5/8 in
- Tooth pitch
- 3.5 TPI
- Construction
- Bi-metal
- Coating
- Thermoset
- Plug access
- ALL-ACCESS slots
Choose the Correct Fit
Match the hole diameter to the fitting or opening specification. Check the work area for wiring, pipe and concealed hardware.
Use a compatible arbor and pilot bit, and confirm the drill’s hole-saw capacity. Secure loose work and brace the tool before starting.
Installation & Care
Choose speed and lubricant for the material using the saw and drill instructions. Ease pressure if the cut stalls or overheats.
Disconnect power before removing a plug or changing the saw. Let the cup cool, then inspect the teeth and arbor connection.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a hole saw? Tell Willy the opening diameter, material thickness and drill or arbor you plan to use.
Important Product Questions
Which materials can this bi-metal saw cut?
It is specified for thick and thin metal, aluminum, wood with or without nails, drywall and plastic. Choose a saw rated for the actual material.
Can it cut through material thicker than the cup?
Its cutting depth is 1-5/8 in. Plan access and plug removal before drilling thicker work; do not force the cup beyond its cutting clearance.
What do I need to connect it to my drill?
Match the arbor to the saw connection and diameter, then check its shank against your drill chuck. Do not assume every arbor fits.
