Milwaukee
Milwaukee Tool 3/8" Drive 21mm Socket
- SKU:
- MLW45-34-8021
- Availability:
- Usually Ships Same Day
- Weight:
- 0.20 LBS
Description

DUTY®
21 mm Standard
6-Point Socket
A 21 mm standard-depth socket for matching metric fasteners, ready for a 3/8-inch drive hand-tool setup.
Product Overview
The 21 mm opening fits matching metric hex fasteners; check that the socket seats fully.
Connect the 3/8-inch square drive to a hand ratchet or extension; check working clearance.
- Anti-roll flatsHelps resist rolling.
- Wrench-ready sidesWrench-compatible flats.
- Readable sizingStamped size markings.
- Fastener protectionAnti-rounding geometry.
Technical Specifications
- Drive size
- 3/8 in
- Socket size
- 21 mm
- Fastener fit
- 6-point
- Depth
- Standard
- Size marking
- Stamped
- Finish
- Chrome
Choose the Correct Fit
Choose this 21 mm opening for the matching fastener size. Confirm a snug fit before applying force.
Use a 3/8-inch drive hand ratchet or suitable extension. Check that the socket is fully retained before starting.
Installation & Care
Check the clearance above and around the fastener. A standard socket keeps the setup compact where extra depth is unnecessary.
Keep the opening and square drive free of grit. Inspect for cracks or damaged corners and replace a worn socket before use.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching this socket? Tell Willy your fastener size, drive size and available clearance so the GetPipe team can check your selection.
Important Product Questions
Can I substitute a nearby SAE size?
Choose the exact fastener size and measurement system. A near match can leave play at the corners; stop if the socket rocks or fails to seat fully.
Can I turn it with a wrench?
Yes. FOUR FLAT sides are wrench-compatible. Choose a wrench that fits the outer flats securely; the fastener opening does not give that wrench size.
Is this the right depth for the job?
Use the standard format where it seats fully on the fastener with enough space for the ratchet. Choose a deep socket if the stud or recess requires more reach.