Milwaukee
Milwaukee Tool 2" x 12" Diamond Premium Wet Core Bit Extension
- SKU:
- MLW48-17-4020
- Availability:
- Usually Ships Same Day
- Weight:
- 3.30 LBS
Description
DUTY®
Premium Wet Core
12 in Extension
Add 12 in of drill-tube reach to a compatible 2 in Milwaukee Diamond Premium wet core bit.
Product Overview
Add 12 inches of tube reach to a matching 2-inch Diamond Premium wet core bit.
Match the 1-1/4-7 connection to the core setup and apply anti-seize to the threads.
- Added drilling reachExtends the tube by 12 in.
- Matched bore sizeKeeps the chosen core size.
- Premium system fitFor matching wet core bits.
- Thread preparationApply anti-seize to threads.
Technical Specifications
- Core size
- 2 in
- Added reach
- 12 in
- Connection thread
- 1-1/4-7
- Drilling mode
- Wet
- Compatible series
- Diamond Premium
- Thread preparation
- Anti-seize lubricant
Choose the Correct Fit
Match the extension to the 2 in Diamond Premium wet core bit and its 1-1/4-7 connection. Do not select by spindle thread alone.
Confirm the required hole depth and room for the extended assembly. Check the core drill’s capacity and any stand-travel limits.
Installation & Care
Isolate the drill before assembly. Apply anti-seize lubricant to the threads before fitting the extension, as directed by Milwaukee.
After wet coring, clean away slurry and inspect the threads and tube. Store only after the components are clean and dry.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help extending a core setup? Send Willy the core-bit part number, bore diameter, drill model and extra reach needed.
Important Product Questions
Does this extension increase the hole diameter?
No. It adds 12 in of drill-tube reach to the matching 2 in Premium wet core setup. Select the core bit for the required opening size.
Will it fit every wet core bit with the same spindle thread?
Do not assume interchangeability. This extension is listed for the Diamond Premium wet-core system and must match the core size and connection.
How should I prepare the threads?
Apply anti-seize lubricant before use, following the product and drill instructions. Inspect and clean the threads before assembling the extension.
