Milwaukee
Milwaukee Tool 193PC Class B Type III PACKOUT First Aid Kit
- SKU:
- MLW48-73-8430C
- Availability:
- Usually Ships Same Day
- Weight:
- 9.30 LBS
Description
DUTY®
Class B Type III
First Aid Kit
A 193-item first-aid supply kit in an impact-resistant PACKOUT organizer with an IP65-rated weather seal.
Product Overview
The clear lid reveals supplies while no-travel bin seals help keep them in assigned compartments.
This Class B, Type III kit is manufacturer-listed to ANSI Z308.1-2015; check job requirements.
- Visible suppliesSee contents through lid.
- Separated storageBin seals reduce shifting.
- Weather protectionIP65-rated closed-case seal.
- First-aid identityGreen first-aid markings.
Technical Specifications
- Listed standard
- ANSI Z308.1-2015
- Kit class
- B
- Container type
- III
- Ingress rating
- IP65
- Outer W × D × H
- 19.7 × 15.2 × 4.6 in
- Inner W × D × H
- 18 × 12 × 3.9 in
Choose the Correct Fit
Choose for workplace hazards and applicable requirements. The stated 2015 edition does not establish compliance with later standards or every local rule.
Place the kit where designated responders can reach it quickly and keep the location clearly identified. Do not bury it below unrelated tools.
Installation & Care
Check the inventory after use and on the site’s regular inspection schedule. Replace used, damaged or expired supplies and follow each item’s storage instructions.
Keep the case seal clean and latch the lid fully for transport. Dry the case after wet conditions; do not submerge it or use damaged medical supplies.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the required kit class, storage space and workplace supply needs. We can help compare kit configurations while your safety lead confirms the applicable requirements.
Important Product Questions
Does this guarantee compliance with every current workplace requirement?
No. The manufacturer states ANSI Z308.1-2015 Class B, Type III. Confirm current site requirements, hazards and any additional supplies with the responsible safety professional.
Is the case waterproof under water?
No. The case has an IP65 weather seal for dust and water-jet protection when properly closed. It is not intended for submersion.
How should I maintain the kit?
Inspect the contents routinely and after use, replace expired or consumed supplies, and keep the case accessible, clean and clearly identified.
