Milwaukee
Milwaukee Tool 12" Diamond Premium Segmented
- SKU:
- MLW49-93-7935
- Availability:
- Usually Ships Same Day
- Weight:
- 4.50 LBS
Description
DUTY®
12 in Diamond
Premium Blade
A segmented diamond blade for concrete and masonry cutting.
Product Overview
The segmented edge cuts concrete and masonry. Openings help clear material from the cut.
Choose the blade for the actual material: specialized asphalt and ductile-iron work needs its own rating.
- Diamond rimFor abrasive masonry cuts.
- Cutting profileSegmented.
- Wet or dryMatch the tool and setup.
- Debris clearanceSegments help clear the kerf.
Technical Specifications
- Diameter
- 12 in
- Arbor
- 1 in / 20 mm
- Rim
- Segmented
- Abrasive
- Diamond
- Use method
- Wet / dry
- Materials
- Concrete / masonry
Choose the Correct Fit
Match the blade diameter, arbor and maximum speed to the saw. Use only the specified flanges, guard and approved arbor configuration.
Identify the material before cutting. Plan silica-dust controls and support the work so the kerf cannot close on the blade.
Installation & Care
Disconnect power before installation and follow the rotation arrow. Wet cutting requires a tool and water supply approved for that method.
Make controlled passes without twisting the blade in the kerf. Replace blades with cracks, missing segments or an out-of-round core.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the saw model, material and wet or dry setup to check the right diamond blade.
Important Product Questions
Can I cut asphalt or ductile iron?
Do not assume that rating. This blade is for general concrete and masonry work; use an application-specific blade for asphalt or ductile iron.
Can this blade run wet on any saw?
No. Wet cutting is appropriate only with an approved tool and water supply. Use the saw manufacturer’s dust-control method for dry cutting.
How do I choose the arbor setup?
Match the exact saw spindle and flange instructions. Where multiple arbor sizes are listed, use only the blade’s intended configuration and approved reducing hardware.
