Milwaukee
Milwaukee Tool 10 FT. DOUBLE INSULATED 2-WIRE QUIK-LOK CORD
- SKU:
- MLW48-76-5010
- Availability:
- Usually Ships Same Day
- Weight:
- 0.91 LBS
Description
DUTY®
10 ft 2-Wire
QUIK-LOK Replacement Cord
Replace the detachable cord on the matching Milwaukee QUIK-LOK tool.
Product Overview
This 10 ft QUIK-LOK cord uses flexible Hi-Flex wire in a two-wire configuration and a NEMA 1-15P plug. Match the cord to the tool’s specified detachable-cord connection.
Confirm the complete cord model and tool connection before replacement. A longer cord or matching plug alone does not establish the correct tool fit.
- Detachable connectionQUIK-LOK permits replacement of the complete cord assembly.
- Flexible constructionThe cord uses the specified Hi-Flex wire.
- Matched plug formatSelect the listed NEMA plug for the approved tool setup.
- Field replacementReplace a damaged cord without substituting a fixed cord.
Technical Specifications
- Model
- 48-76-5010
- Cord length
- 10 ft
- Conductors
- 2-wire
- Plug type
- NEMA 1-15P
- Tool connection
- QUIK-LOK
- Wire type
- Hi-Flex
Choose the Correct Fit
Read the tool’s replacement-cord specification and match the part number, plug and conductor arrangement.
This is a two-wire cord with a NEMA 1-15P plug; never substitute it where a grounded three-wire cord is required.
Installation & Care
Unplug the cord before replacement. Follow the QUIK-LOK instructions for aligning the contacts and locking the collar.
Inspect the full cable and connectors before use. Replace damaged cords and keep the connector clean and dry.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help comparing this item? Share model 48-76-5010 and the application or specification you want to confirm.
Important Product Questions
How long is the cord?
The cord is 10 ft long.
Which plug is specified?
This version is listed with a NEMA 1-15P plug.
Will every QUIK-LOK cord fit my tool?
Use the cord model specified for the actual tool and electrical configuration, not the connector appearance alone.
