Milwaukee
Milwaukee Tool 10" Adjustable Wrench
- SKU:
- MLW48-22-7410
- Availability:
- Usually Ships Same Day
- Weight:
- 1.15 LBS
Description
DUTY®
10 in
Adjustable Wrench
An adjustable wrench with a 10 in handle for matching a range of fastener flats.
Product Overview
The 10 in handle balances reach and working space when approaching nuts and bolts.
The moving jaw fits the fastener without changing to another fixed-size wrench.
- Adjustable openingScrew-controlled jaw setting.
- Readable scaleLaser-etched sizing guide.
- Rounded handleComfortable in the palm.
- Chrome platingHelps protect against rust.
Technical Specifications
- Length
- 10 in
- Jaw profile
- Wide
- Adjustment
- Proprietary screw
- Handle
- Rounded
- Sizing scale
- Laser-etched
- Finish
- Chrome plated
Choose the Correct Fit
Choose this 10-inch tool for the available handle clearance. Confirm that its jaw opening fits the actual fastener.
Use the etched scale as a setup guide, then close the jaws snugly onto the fastener flats. Recheck the fit before applying force.
Installation & Care
Keep the jaws square to the nut or bolt. Follow proper adjustable-wrench loading technique and stop if the tool slips.
Wipe dirt from the adjustment screw and jaw slides. Inspect for worn jaws or excess play and store the tool clean and dry.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing? Tell Willy the fastener size, tool setup and available clearance so the GetPipe team can check the match.
Important Product Questions
Does the handle length give the jaw capacity?
No. The stated inch length describes the tool. Measure the fastener and check the required jaw opening separately before ordering.
Can I rely on the etched scale alone?
Use the scale to approach the required opening, then confirm a snug fit directly on the fastener. Any play should be removed before turning.
Is it intended for round pipe?
For round pipe, select a pipe-gripping tool suited to the pipe and surface. Adjustable-wrench jaws should be matched securely to fastener flats.
