Milwaukee
Milwaukee Tool 10" 80T Ultra Fine Finish Circular Saw Blade
- SKU:
- MLW48-40-1032
- Availability:
- Usually Ships Same Day
- Weight:
- 1.72 LBS
Description
DUTY®
10 in 80T
Ultra Fine Blade
A carbide-tooth circular saw blade for ultra fine cuts in wood and laminated panels.
Product Overview
The 80-tooth edge favors a clean finish on wood and sheet goods when the cut will remain visible.
Beveled teeth limit tearout, while the anti-friction coating helps control heat and pitch buildup.
- Carbide teethRetain a sharp cutting edge.
- Thin kerfReduces material removal.
- Clean cuttingBeveled teeth limit tearout.
- Anti-frictionResists heat and pitch buildup.
Technical Specifications
- Diameter
- 10 in
- Teeth
- 80
- Arbor
- 5/8 in
- Tooth material
- Cobalt-infused carbide
- Kerf
- Thin
- Tooth pattern
- High ATB
Choose the Correct Fit
Match blade diameter, arbor and speed rating to the saw. If the saw has a riving knife, also check the blade-body and kerf requirements.
Choose a tooth pattern for the material and finish you need. Support sheet goods and offcuts so they cannot sag and pinch the blade.
Installation & Care
Disconnect power before changing the blade. Follow the rotation arrow and fit the correct flanges with the guard operating freely.
Keep pitch buildup off the blade using a suitable cleaner. Replace blades with cracks, missing carbide tips or distorted bodies.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy your saw model, arbor, material and finish requirements to narrow down the right blade.
Important Product Questions
Will it fit any saw of the same blade size?
No. Match the 10 in diameter, 5/8 in arbor and blade speed rating, then check the saw’s blade and guard requirements.
Can this blade cut metal?
This is a wood-cutting blade. Choose a blade rated for the metal and saw rather than using these wood-cutting teeth on fasteners or metal stock.
How do I reduce tearout?
Support the material close to the cut, use a sharp blade and a steady feed, and follow the saw’s recommendations for blade exposure and finished-face orientation.
