Milwaukee
Milwaukee Tool 1-3/8" x 18" Ship Auger Bit
- SKU:
- MLW48-13-6370
- Availability:
- Usually Ships Same Day
- Weight:
- 3.31 LBS
Description
DUTY®
1-3/8 in × 18 in
Ship Auger Bit
Cut 1-3/8 in holes in clean or nail-embedded wood with this 18 in ship auger bit.
Product Overview
The 1-3/8 in auger strikes embedded nails with a through-center tip for wire, pipe or bolt holes.
Wide, polished, coated flutes clear deep-hole chips; its 18 in length adds reach without an extension.
- Hardened 20° faceHandles nail strikes.
- Coated flutesHelp clear chips / buildup.
- Through-center cutSolid point strikes nails.
- Impact-rated shankFor impact-wrench use.
Technical Specifications
- Hole diameter
- 1-3/8 in
- Bit length
- 18 in
- Cutting design
- Through-center
- Rake angle
- 20°
- Flute finish
- Polished and coated
- Shank rating
- Impact rated
Choose the Correct Fit
Check the path for wiring, pipe and structural hardware. Nail resistance does not make concealed objects safe to drill.
Confirm the shank fit and the tool’s wood-boring capacity. Secure the bit and brace the tool for the self-feeding pull.
Installation & Care
Withdraw as needed to clear chips from deep holes. Stop and disconnect the tool before freeing a bit that has bound.
Let the bit cool before cleaning. Inspect the feed screw and cutting face, especially after striking embedded nails.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a ship auger for framing or utility work? Tell Willy the hole diameter, wood thickness and tool chuck.
Important Product Questions
Can it be used in wood containing nails?
Yes. Its hardened cutting face and through-center geometry are designed for nail-embedded wood as well as clean wood.
Is the full bit length usable drilling depth?
No. Overall length includes the shank. Check the exposed cutting reach after the bit is installed.
Can I use it with an impact wrench?
The shank is impact rated. Confirm the wrench’s connection, any required adapter and permitted drilling capacity before use.
