Milwaukee
Milwaukee Tool 1/2 Inch x 10 Inch x 12 Inch SHOCKWAVE Impact Duty Carbide Multi-Material Drill Bit
- SKU:
- MLW48-20-8893
- Availability:
- Usually Ships Same Day
- Weight:
- 0.34 LBS
Description
DUTY®
Multi-Material
Carbide Drill Bit
Choose 1/2 in carbide drilling for mixed materials with a compatible drill or impact.
Product Overview
Choose 1/2 in holes with 10 in usable reach. Leave clearance for the bit’s 12 in overall length.
Multi-grind carbide cuts masonry, metal and mixed layers. Select the drilling mode for each material.
- Carbide tipCuts into demanding materials.
- Accurate startsGround cutting edges.
- Hex-shank fitFor compatible holders.
- Layered materialsDrills mixed-material layers.
Technical Specifications
- Diameter
- 1/2 in
- Usable length
- 10 in
- Overall length
- 12 in
- Tip material
- Carbide
- Tip design
- Multi-grind
- Shank
- 1/4 in hex
Choose the Correct Fit
Follow the fastener instructions for hole diameter, depth and cleaning. Check for concealed services before drilling.
Select hammer mode only for suitable masonry or concrete. Use the mode required for each other material.
Installation & Care
Disconnect power before changing bits. Secure the work and use the dust controls required for the material.
Let the bit cool before handling. Inspect the carbide and remove chips or dust with the tool stopped.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help selecting a carbide bit? Tell Willy the material, fastener, hole depth and tool connection.
Important Product Questions
Can I drill porcelain tile with this bit?
No. This multi-material carbide bit is not recommended for porcelain tile. Choose a bit specifically suited to that tile.
Should I use hammer mode for every material?
No. Hammer mode is for suitable masonry and concrete. Change the setting for metal, wood, plastic or tile according to the material and tool instructions.
Does the overall length equal drilling depth?
No. Overall length is 12 in and includes the shank. Check usable reach and the required hole depth before drilling.
