Milwaukee
Milwaukee Tool 1-1/2" Quick-Change Steel Plate Carbide Cutter
- SKU:
- MLW49-57-8227
- Availability:
- Usually Ships Same Day
- Weight:
- 0.70 LBS
Description
DUTY®
1-1/2 in Cutter
Quick Change Steel Plate
A 1-1/2 in carbide-tipped cutter with a 1/2 in cutting depth. Match the connection and material thickness before drilling.
Product Overview
This 1-1/2 in cutter makes a fixed-size hole in metal. Match its 1/2 in cutting depth to the thickness of the work.
Choose the correct connection before drilling. Secure the work and keep the cutter aligned during the cut.
- Carbide tipsDurable edges for metal cutting.
- Quick changeUses a compatible cutter adapter.
- Clean holesDesigned for a smooth hole edge.
- Plate capacity1/2 in maximum cutting depth.
Technical Specifications
- Diameter
- 1-1/2 in
- Cutting depth
- 1/2 in
- Teeth
- Carbide
- Connection
- Quick change
- Adapter option
- 49-57-0035
- Application
- Steel plate
Choose the Correct Fit
Match the 1-1/2 in diameter and 1/2 in cutting depth to the job. Use a drill press for material 3/8 in or thicker, as Milwaukee recommends.
Use a compatible arbor, such as quick-change adapter 49-57-0035. Its 3/8 in shank belongs to the adapter; it is not an integral shank on this cutter.
Installation & Care
Use cutting fluid as recommended to keep the cutting surface cool and lubricated. Secure the work and maintain alignment rather than forcing the teeth.
Stop the tool before clearing chips or a cut plug. Let the cutter cool, inspect the carbide tips for damage, and clean and dry it before storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing the right cutter or step bit? Share model 49-57-8227, the material thickness and your drill setup.
Important Product Questions
Does this cutter have a built-in 3/8 in shank?
No. This quick-change cutter uses a compatible adapter. Milwaukee lists adapter 49-57-0035 with a 3/8 in shank; do not treat that as the cutter shank.
What thickness can it cut?
The cutting depth is 1/2 in. Milwaukee recommends a drill press for material 3/8 in or thicker.
Should I use cutting fluid?
Yes. Milwaukee recommends cutting fluid for this cutter family to help keep the cutting surface cool and lubricated. Follow the tool and fluid instructions.
