Marco

1" ID super-flex blast hose with 1/8" inner tube for flexibility and reduced weight. This hose is uncoupled. 1" ID x 1-1/2" OD 50' section Uncoupled 1/8" liner thickness 175 PSI working...

Nipple 8" X 1-1/4" Male NPT for Maxum Abrasive Metering Valve  

#8 Stealth Short-V NPS Nozzle 1/2"

1/4" ID x 25' Airless Spray Hose, 3600 PSI with female x female fittings. 1/4" ID x 25' Airless Spray Hose 3600 PSI working pressure Female x Female couplings installed Polyester braid...

The Barricade 286 6-outlet Airline Filter removes moisture, oil, odor, particulates, and organic vapors from compressed air and can be used as a component of a supplied-air...

3/8" Lock Washer Galvanized

#6 Silicon carbide all poly long venturi blast nozzle with 50MM thread. #6 - 3/8" orifice 1-1/4" entry with 50MM thread Lightweight all polyurethane jacket and threads Silicon carbide liner 7"...

Pop-up valve with male internal sleeve. Orange rubber body, seats with Pop-Up Valve Seat (1006040) Pop-Up Valve, Internal Orange Rubber Body

#4 Ceramic type 1 blast nozzle with premium grade alumina ceramic #4 - 1/4" orifice 5/8" entry Premium grade alumina ceramic Type 1 3-3/4" length Documents: Blast Nozzles - Part Numbers and...

K-Series Abrasive Metering Valve – Complete  

The Allredi 152P Remote Control Switch has a lightweight, durable aluminum body that utilizes a spring loaded safety tab and broad handle. This is a red switch with a repairable design and every...

Hose Clamp - 3/4" ID Abrasive Blasting Hose  

Valve Cover Gasket for 2 and 4 Hole Jr.

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" GateKeeper Air Valve is a component part of the pressure-hold 130P and...

1-1/2" Bantam Abrasive Metering Valve  

3/8" x 50' section of fluid hose, coupled with two 3/8" compression x 3/8" female NPS fittings 3/8" ID x 11/16" OD 50' length Coupled with two 2080020 3/8" compression x 3/8" female NPS...

#5 Straight bore blast nozzle. #5 - 5/16" orifice 1/2" entry with 3/4" NPS thread Steel jacket and threads Tungsten carbide liner 1-3/4" length Blast Nozzles - Part Numbers and Schematics Guide -...

Service kit for Allredi 1-1/2" Inlet Valve. Includes o-rings, inner spring, bottom cap gasket, outer spring, and two plug washers. Service Kit for Allredi 1-1/2" Inlet Valve Documents: ...

1-1/2" NPT Aluminum Tank Coupling, Tapered Threads, Oversized Lugs 1-1/2" NPT aluminum tank coupling Tapered threads Oversized lugs

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 24" tops. Includes one handle. 24" Blast Pot Lid Steel One Handle

1-1/4" Heavy-Duty Threads Aluminum Nozzle Holder  

#3 Alloy Poly TC NPS Nozzle 3/16"

The Barricade Carbon Monoxide Monitor uses audio and visual alarms to notify operators when CO levels exceed the allowable level. The Barricade Carbon Monoxide Monitor is a...

A blast pot exhaust muffler reduces the noise and traps particles generated during the depressurization process of a blast pot. Blast Pot Exhaust Muffler Aluminum body Steel Mesh Screen HDPE...

1/8" female nut & barb for twinline hoses. This part is used to connect the 1/8" threaded leg of twinline with 1/4" and 1/8" fittings. All twinline hose has a 3/16" ID. 1/8" female nut &...

Allredi 301 Hose-Mounted Light with 6' of 14/2 SEOW cord. The 301 light uses a 35-watt halogen bulb and is air-cooled using a 1/4" ID air hose (not included). This is a replacement light and does...

Handle Grip for Blastmaster® 153 Remote Control Valve

Aluminum replacement handle for the Allredi 150P and 151E Remote Control Switches Replacement Handle Fits Allredi 150P & 151E Remote Control Switch Documents: Allredi 150P Remote Control...

Size 1 brass coupling for 1-1/2" OD blast hose. Standard size 2-lug style. Size 1 Fits 1-1/2" OD blast hose Standard 2-lugs style Brass body Use 10SBG or 10USBG gaskets

Ultralite Blast Suit, size 3X-Large. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous...

Size 1 brass nozzle holder for 1-1/2" OD blast hose. Fits 1-1/4" nozzle thread style. Size 1 Fits 1-1/2" OD blast hose For 1-1/4" thread style Use 10NW nozzle washer Brass material

#4 Tungsten carbide brass poly long venturi blast nozzle. #4 - 1/4" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 5-1/4" length ...

2-lug threaded end coupling with 3/4" male threads for connecting equipment to a hose. 2-lug 3/4" male thread size Plated iron Uses 10UG2 rubber gasket

#5 Tungsten carbide brass poly long venturi blast nozzle. #5 - 5/16" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 5-3/4" length ...

5 Ft. Pneumatic Twinline Hose - 3/16" Fittings

1/2" ID x 10 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

Allredi 155E Remote Control Switch utilizes a toggle switch to activate and deactivate the blast pot. This is a permanently sealed remote control switch to keep dust and debris from entering the...

#7 Alloy Poly TC Wide NPS Nozzle

#6 (3/8") Short Venturi Nozzle, polyurethane jacket, tungsten carbide liner, 1" entry with 1-1/4" NPS threads Short Venturi Nozzle #6 - 3/8" orifice 1" entry with 1-1/4" NPS threads...

#7 (7/16") Short Venturi Nozzle, polyurethane jacket, tungsten carbide liner, 1" entry with 1-1/4" NPS threads Short Venturi Nozzle #7 - 7/16" orifice 1" entry with 1-1/4" NPS threads...