Marco

3/8" ID fluid hose, uncoupled, sold per foot 3/8" ID x 11/16" OD fluid hose Sold per foot Uncoupled 750 PSI working pressure Black cover

#2 Ceramic type 1 blast nozzle with premium grade alumina ceramic #2 - 1/8" orifice 5/8" entry Premium grade alumina ceramic Type 1 3-3/4" length Documents: Blast Nozzles - Part Numbers and...

Size #5, 45° single outlet angle nozzle with tungsten carbide liner and brass threads. #5 - 5/16" orifice, three outlet 1" entry with 1-1/4" NPS brass threads Tungsten carbide...

The Barricade Carbon Monoxide Monitor uses audio and visual alarms to notify operators when CO levels exceed the allowable level. The Barricade Carbon Monoxide Monitor is a...

The Service Kit for 1-1/2" High Flow GateKeeper Air Valves replaces the interal nuts, gaskets, o-rings, a disc, and disc plate. See part numbers and schematics guide for a full list of part numbers...

#5 Silicon carbide all poly long venturi blast nozzle with 50MM thread. #5 - 5/16" orifice 1-1/4" entry with 50MM thread Lightweight all polyurethane jacket and threads Silicon carbide liner 6"...

#7 Tungsten carbide brass poly long venturi blast nozzle. #7 - 7/16" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 8"...

The Allredi 120-Volt AC to 12-Volt AC power converter is designed for converting standard wall power down for use with other equipment. This converter is used with the Allredi 300 Series...

Heavy-Duty Air Hose Gasket - 4-Lug  

Ultralite Blast Suit, size X-Large. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous...

Blast pot screens prevent large debris or abrasive bags from falling in to blast pots. This screen fits blast pots with 18" tops and can be kept in place while using blast pot lids. 18" Blast Pot...

Service Kit for Tandem Remote Control Valve  

4-lug threaded end coupling with 1-1/4" thread size for connecting equipment to a hose. 4-lug 1-1/4" female thread size Plated iron Uses 10UG4 rubber gasket

Blastmaster® 151 Electric Remote Control Switch with Low Profile Plugs

The Allredi 125E Remote Control System is a OSHA compliant "fail-to-safe" system with a 1-1/2" brass inlet valve, 1" brass outlet valve, abrasive trap, 120-Volt AC to 12-Volt AC power converter,...

3/16" male x male hose union for connecting two sections of twinline air hose together 3/16" male x male hose union Brass  For 3/16" ID twinline air hoses

Easy-Flow Manual Regulator Valve  

Nozzle washer for ceramic nozzles. Use with nozzle cap 10L100164 to provide a barrier between the ceramic nozzle and the outlet of the Allredi 153 Remote Control Valve. Nozzle Washer for Ceramic...

#8 Supersonic 3/4" NPS Nozzle 1/2"  

Size 3 brass coupling for 2-5/32" OD blast hose. Standard size 2-lug style. Size 3 Fits 2-5/32" OD blast hose Standard 2-lug Brass body Uses 10SBG or 10USBG gasket

Allredi 0.35 L-Series Blast Pot w/ 2-Hole Junior Mixing Valve, two #2 Type I ceramic nozzles, moisture separator, blast hose, no remote control valve Allredi 0.35 Cu Ft L-Series Blast Pot 2-Hole...

1/4" ID x 25' Airless Spray Hose, 5000 PSI with female x female fittings. 1/4" ID x 25' Airless Spray Hose 5000 PSI Female x Female couplings installed Steel braid reinforcement Black cover

#5 Brass Poly TC Wide NPS Nozzle - 1/4"

#6 Tungsten carbide brass poly long venturi blast nozzle. #6 - 3/8" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 6-1/2"...

Hair Pin Clip  

Barricade CO monitor 12-Volt DC power cord. For use with the Barricade CO monitor  10' of power cord Documents: Barricade® Carbon Monoxide Monitor - Part Numbers and Schematics Guide...

Galaxy 307 Hose-Mountable Blast Light with 10 Ft. Power Cord

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 18" tops. Includes one handle. 18" Blast Pot Lid Steel One Handle

Valve cover with 1/2" NPT for Allredi 2-Hole Junior Mixing Valve Valve cover for Allredi 2-Hole Junior Mixing Valve 1/2" NPT Outlet Documents: Allredi 2-Hole Junior Mixing Valve - Part...

Size 1 aluminum coupling for 1-1/2" OD blast hose. Standard size 2-lug style. Size 1 Fits 1-1/2" OD blast hose Standard 2-lug Aluminum body Uses 10SBG or 10USBG gaskets

Nipple 8" X 1-1/2" Male NPT for Maxum Abrasive Metering Valve  

3/16" X 1" Roll Pin  

#7 Silicon carbide all poly long venturi blast nozzle. #7 - 7/16" orifice 1" entry with 1-1/4" NPS thread Lightweight all polyurethane jacket and threads Silicon carbide liner 8"...

1-1/4" NPT Brass Tank Coupling, Tapered Threads 1-1/4" NPT brass tank coupling Tapered threads Standard lug size

1" ID heavy duty blast hose with 5/16" inner tube for strength and durability. This 50' section is coupled with two aluminum 2-lug couplings.  1" ID x 1-7/8" OD 50' length Coupled with two...

2-lug threaded end coupling with 1" male thread size for connecting equipment to a hose. 2-lug 1" male thread size Plated iron Uses 10UG2 rubber gasket

1" ID heavy duty blast hose with 5/16" inner tube for strength and durability. This 50' section is uncoupled.  1" ID x 1-7/8" OD 50' length Uncoupled 5/16" liner thickness 4-ply fabric...

5/16" Flat Washer Galvanized

Size 3 brass nozzle holder for 2-5/32" OD blast hose. Fits 1-1/4" nozzle thread style. Size 3 Fits 2-5/32" OD blast hose For 1-1/4" nozzle thread style Brass body Use 10NW nozzle washer