Hilti
Hilti HIT-HY 200-A V3 Adhesive Anchor 11.16oz
- SKU:
- 3778123
- Availability:
- Usually Ships Same Day
- Weight:
- 2.10 LBS
Description
Hilti HIT-HY 200-A V3 Adhesive Anchor 11.16oz
Hilti HIT-HY 200-A V3 Adhesive Anchor is an ultimate-performance injectable hybrid adhesive anchor designed for structural anchoring and post-installed rebar applications in cracked and uncracked concrete.
The accelerated "A" formulation provides faster gel and cure times to help improve installation productivity while maintaining dependable anchoring performance. Designed for demanding commercial, industrial, and infrastructure applications, HIT-HY 200-A V3 can be used in dry, wet, and water-filled concrete conditions when installed in accordance with Hilti requirements.
Product Highlights
- Ultimate-performance injectable hybrid adhesive anchor
- Accelerated "A" formula for faster gel and cure times
- Designed for structural anchoring applications
- Suitable for post-installed rebar connections
- Designed for cracked and uncracked concrete
- Approved for dry concrete conditions
- Approved for wet concrete conditions
- Approved for water-filled concrete conditions
- Helps improve installation productivity
- Suitable for demanding commercial applications
- Suitable for industrial construction
- Suitable for infrastructure projects
- Compatible with the Hilti HDM 500 Manual Adhesive Dispenser
Technical Specifications
| Product Type | Injectable Hybrid Adhesive Anchor |
|---|---|
| Manufacturer | Hilti |
| Product | HIT-HY 200-A V3 |
| Package Size | 11.16 oz |
| Formula | Accelerated "A" Formula |
| Primary Use | Structural Anchoring and Post-Installed Rebar |
| Substrate | Concrete |
| Concrete Condition | Cracked and Uncracked Concrete |
| Installation Conditions | Dry, Wet, and Water-Filled Concrete |
| Adhesive Type | Two-Component Hybrid Adhesive |
| Compatible Dispenser | Hilti HDM 500 Manual Adhesive Dispenser |
Performance & Cure Characteristics
Accelerated Cure
The HIT-HY 200-A V3 uses an accelerated formulation designed to reduce gel and cure times compared with slower-curing adhesive systems.
Faster curing can help contractors move more quickly through anchor installation sequences and reduce waiting time before subsequent project steps.
Structural Anchoring Performance
The adhesive is designed for demanding structural anchoring and post-installed rebar applications where dependable load transfer into concrete is required.
Actual allowable loads, embedment depths, spacing, edge distances, and installation requirements depend on the specific anchor or rebar configuration and must be confirmed using Hilti technical documentation.
Concrete Installation Conditions
HIT-HY 200-A V3 is designed for use in cracked and uncracked concrete and can be installed in multiple concrete moisture conditions.
The supplied product information identifies the adhesive for use in dry, wet, and water-filled concrete conditions. Installation procedures may vary depending on the condition of the drilled hole and the specific anchoring application.
Always follow the applicable Hilti installation instructions for drilling, hole cleaning, adhesive injection, anchor placement, curing, and final loading.
Compatible Dispenser
Hilti HDM 500 Manual Adhesive Dispenser
The HIT-HY 200-A V3 adhesive anchor is compatible with the Hilti HDM 500 Manual Adhesive Dispenser – Part #3498314.
The dispenser provides controlled delivery of the two-component adhesive through the appropriate mixing nozzle during anchor and rebar installation.
Why Choose Hilti HIT-HY 200-A V3?
Faster Installation
- Accelerated gel time
- Accelerated curing
- Helps reduce installation waiting time
- Supports productive anchor installation
- Designed for professional jobsite use
Versatile Concrete Applications
- Cracked concrete
- Uncracked concrete
- Dry concrete conditions
- Wet concrete conditions
- Water-filled concrete conditions
Typical Applications
Structural Anchoring
- Structural anchor installation
- Threaded rod anchoring
- Base plate anchoring
- Equipment anchoring
- Commercial and industrial construction
Post-Installed Rebar
- Post-installed reinforcing bar connections
- Concrete extensions
- Structural concrete modifications
- Rebar connection applications
- Infrastructure construction
Installation
Confirm the required anchor or reinforcing bar size, hole diameter, embedment depth, spacing, edge distance, concrete condition, and installation temperature before beginning work.
Drill the anchor hole to the dimensions specified by Hilti for the selected anchor or rebar configuration.
Clean the drilled hole according to the applicable Hilti installation procedure. Proper hole cleaning is critical to achieving the intended adhesive anchor performance.
Load the adhesive cartridge into the compatible Hilti HDM 500 dispenser and install the specified mixing nozzle.
Dispense enough initial adhesive to confirm that both components are completely mixed before injecting adhesive into the anchor hole.
Inject the adhesive according to the Hilti installation instructions, then insert the threaded rod, anchor element, or reinforcing bar to the required embedment depth.
Allow the adhesive to cure for the required amount of time before applying load to the installed anchor. Cure time varies with installation temperature and other jobsite conditions.
Our specialists can help review your anchor or rebar size, concrete condition, adhesive requirements, dispenser compatibility, installation environment, and project requirements before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is Hilti HIT-HY 200-A V3 used for?
It is an injectable hybrid adhesive anchor designed for structural anchoring and post-installed rebar applications in concrete.
What does the "A" in HIT-HY 200-A V3 mean?
The "A" identifies the accelerated formulation, which is designed to provide faster gel and cure times.
Can HIT-HY 200-A V3 be used in cracked concrete?
Yes. The supplied product information identifies the adhesive for use in both cracked and uncracked concrete.
Can it be installed in wet concrete?
Yes. The supplied product information identifies HIT-HY 200-A V3 for dry, wet, and water-filled concrete conditions when installed according to Hilti requirements.
Can HIT-HY 200-A V3 be used for post-installed rebar?
Yes. Post-installed rebar is one of the primary applications identified for this adhesive anchor system.
What dispenser is compatible with this adhesive?
The Hilti HDM 500 Manual Adhesive Dispenser, Part #3498314, is listed as the compatible dispenser for this product.
Does this adhesive require a mixing nozzle?
Yes. A compatible mixing nozzle is used to combine the two adhesive components during dispensing. Follow Hilti instructions for the correct nozzle and dispensing procedure.
How long does HIT-HY 200-A V3 take to cure?
Cure time depends on installation temperature and jobsite conditions. Refer to the Hilti installation guide for the required cure time for the specific application.
Can the anchor be loaded immediately after installation?
No. The adhesive must reach the required cure time before the installed anchor or rebar connection is subjected to load.
How important is hole cleaning?
Proper hole cleaning is a critical part of adhesive anchor installation. Follow the exact Hilti cleaning procedure specified for the anchor system and installation condition.
What should I verify before ordering?
Confirm the anchor or rebar size, concrete condition, required embedment depth, installation temperature, dispenser compatibility, project design requirements, and applicable Hilti technical approvals.
Important Ordering & Installation Notes
- This listing is for Hilti HIT-HY 200-A V3 Adhesive Anchor in an 11.16 oz package.
- Compatible dispenser listed for this product is the Hilti HDM 500 Manual Adhesive Dispenser.
- The dispenser may be sold separately unless specifically stated otherwise.
- Mixing nozzles and additional installation accessories may be required.
- Verify compatibility with the intended threaded rod, anchor, or reinforcing bar.
- Verify required anchor diameter and embedment depth before installation.
- Confirm concrete strength and condition before use.
- Follow the specified drilling procedure.
- Follow the complete Hilti hole-cleaning procedure.
- Use the correct mixing nozzle for the adhesive system.
- Discard the initial adhesive required by the manufacturer before injecting the anchor hole.
- Follow the specified adhesive injection procedure.
- Observe all minimum spacing and edge-distance requirements.
- Confirm installation temperature before dispensing.
- Observe the required gel and working times.
- Allow the adhesive to reach the required cure time before loading the anchor.
- Do not disturb the anchor or reinforcing bar during the required cure period.
- Installation requirements may differ for dry, wet, and water-filled holes.
- Refer to Hilti technical documentation for allowable loads and design requirements.
- Follow applicable structural, building, and jobsite requirements.
