Hilti
Hilti HDM 500 Manual Adhesive Dispenser
- SKU:
- 3498314
- Availability:
- Usually Ships Same Day
- Weight:
- 3.00 LBS
Description
Hilti HDM 500 Manual Adhesive Dispenser
The Hilti HDM 500 Manual Adhesive Dispenser is a professional-grade dispensing tool designed for use with compatible Hilti injectable adhesive anchor systems.
Built for fast foil-pack loading, controlled dispensing, and dependable jobsite performance, the HDM 500 helps contractors install adhesive anchors and rebar connections efficiently and consistently. Its balanced ergonomic design supports comfortable operation, while controlled pressure release helps reduce mortar drip during installation.
Product Highlights
- Professional-grade manual adhesive dispenser
- Designed for compatible Hilti injectable adhesive anchor systems
- Fast and easy foil-pack loading
- Quick setup and cartridge change-outs
- Low mortar drip after pressure release
- Balanced ergonomic design
- Helps reduce operator fatigue during repeated dispensing
- Provides smooth, controlled adhesive dispensing
- Supports consistent two-component adhesive mixing
- Compatible with Hilti HIT adhesive anchor systems
- Designed for commercial and industrial jobsite conditions
Technical Specifications
| Product Type | Manual Adhesive Dispenser |
|---|---|
| Manufacturer | Hilti |
| Model | HDM 500 |
| Operation | Manual |
| Primary Use | Dispensing Injectable Adhesive Anchor Materials |
| Loading Style | Foil-Pack Loading |
| Compatible System | Hilti HIT Adhesive Anchor Systems |
| Dispensing Style | Controlled Two-Component Adhesive Dispensing |
| Design | Balanced Ergonomic Manual Dispenser |
| Typical Applications | Adhesive Anchoring and Rebar Connections |
Dispenser Design
Fast Foil-Pack Loading
The HDM 500 is designed for fast and straightforward foil-pack loading, helping reduce setup time when preparing the dispenser for use or changing adhesive packs on the jobsite.
Controlled Dispensing
The manual dispensing mechanism gives the installer direct control over adhesive output, supporting consistent application during adhesive anchor and rebar installations.
Ergonomic Jobsite Performance
The HDM 500 features a balanced ergonomic design intended to improve handling and comfort during repeated dispensing operations.
Its pressure-release characteristics help minimize mortar drip after dispensing pressure is released, supporting cleaner installations and reducing unnecessary adhesive waste.
Durable construction makes the dispenser suitable for demanding commercial and industrial installation environments.
Recommended Adhesive
Hilti HIT-HY 200-A V3 Adhesive Anchor
The HDM 500 can be paired with compatible Hilti injectable adhesive anchor products, including the Hilti HIT-HY 200-A V3 Adhesive Anchor – Part #3778123.
Why Choose the Hilti HDM 500?
Efficient Installation
- Fast foil-pack loading
- Quick adhesive change-outs
- Smooth manual dispensing
- Controlled adhesive output
- Reduced mortar drip after pressure release
Professional Jobsite Design
- Balanced ergonomic construction
- Designed for repeated professional use
- Compatible with Hilti HIT adhesive systems
- Supports adhesive anchor installations
- Supports rebar connection applications
Typical Applications
Adhesive Anchoring
- Concrete anchoring applications
- Threaded rod anchoring
- Compatible adhesive anchor installations
- Commercial construction
- Industrial installation work
Rebar Connections
- Post-installed rebar applications
- Rebar connection installations
- Compatible Hilti injectable adhesive systems
- Structural construction applications
- Professional jobsite use
Operation
Confirm that the selected adhesive product is compatible with the Hilti HDM 500 before use.
Load the compatible foil pack into the dispenser according to the adhesive manufacturer's instructions and install the appropriate mixing nozzle or dispensing accessories required for the adhesive system.
Operate the dispenser using smooth, controlled trigger pressure to dispense the two-component adhesive through the mixing nozzle.
Follow the applicable Hilti adhesive anchoring instructions for hole preparation, cleaning, adhesive dispensing, anchor insertion, installation temperature, cure time, and final loading requirements.
Our specialists can help review your HDM 500 dispenser, adhesive selection, anchoring application, cartridge compatibility, and installation requirements before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is the Hilti HDM 500 used for?
The Hilti HDM 500 is a manual dispenser used to dispense compatible Hilti injectable adhesive anchoring materials for anchor and rebar connection installations.
Is the HDM 500 manually operated?
Yes. The HDM 500 is a manually operated adhesive dispenser that allows the installer to control adhesive output using the dispenser trigger.
What adhesive systems are compatible with the HDM 500?
The dispenser is designed for compatible Hilti HIT injectable adhesive anchor systems. Always verify compatibility with the exact adhesive product before use.
What adhesive is recommended with this dispenser?
One compatible product listed with this dispenser is the Hilti HIT-HY 200-A V3 Adhesive Anchor, Part #3778123.
Does the HDM 500 mix the two adhesive components?
The dispenser pushes the adhesive components through the compatible mixing nozzle, where the two components are combined during dispensing.
Does the dispenser help reduce adhesive dripping?
Yes. The HDM 500 is designed with low mortar drip after pressure release to help support cleaner installations.
Is the HDM 500 intended for professional use?
Yes. The dispenser is designed for demanding commercial and industrial jobsite applications.
Can the HDM 500 be used for rebar installations?
It can be used with compatible Hilti adhesive systems intended for applicable post-installed rebar connection applications.
Do I need a mixing nozzle?
Compatible injectable adhesive systems generally require the appropriate mixing nozzle to correctly combine the adhesive components during dispensing. Follow the instructions for the specific Hilti adhesive being used.
Should I follow the adhesive instructions or the dispenser instructions?
Follow all applicable Hilti instructions for both the dispenser and the specific adhesive system, including cartridge loading, dispensing, hole preparation, installation procedures, cure times, and application limitations.
Important Ordering & Use Notes
- This listing is for the Hilti HDM 500 Manual Adhesive Dispenser.
- Verify compatibility with the intended Hilti adhesive cartridge or foil pack before ordering.
- Adhesive products may be sold separately unless specifically stated otherwise.
- Mixing nozzles and other installation accessories may be required depending on the adhesive system.
- Use only compatible Hilti injectable adhesive anchor products.
- Follow the adhesive manufacturer's cartridge-loading procedure.
- Use the correct mixing nozzle for the selected adhesive system.
- Discard improperly mixed adhesive according to the applicable product instructions.
- Follow all required hole-cleaning procedures before adhesive installation.
- Observe the required working time and cure time for the selected adhesive.
- Confirm installation temperature requirements before use.
- Confirm substrate compatibility before installation.
- Verify anchor or rebar size requirements before installation.
- Do not load an installed anchor before the required adhesive cure time has been reached.
- Refer to Hilti technical documentation for complete installation requirements and limitations.
