Charman Inc.
Copper 90 Degree Short Radius Street Elbow - FTG x C
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
Copper 90 Degree Short Radius Street Elbow - FTG x C
Charman Inc. Copper 90 Degree Short Radius Street Elbows provide a compact 90-degree directional change for soldered copper piping systems. The FTG x C configuration combines a fitting-size end that inserts directly into a compatible copper fitting with a cup end designed to receive copper tube.
The short-radius body is well suited for tight piping layouts where minimizing the overall footprint of the connection is important. The street configuration can also eliminate the short section of copper tube that would otherwise be required between two cup-style fittings.
Product Highlights
- Copper 90-degree street elbow
- Short-radius (SR) configuration for compact installations
- FTG x C connection design
- Copper construction
- Solder / sweat installation
- FTG end connects directly into a compatible fitting cup
- Can reduce the number of components required in compact piping assemblies
Sizes & Part Numbers
| Part Number | Size | UPC |
|---|---|---|
| 330123 | 1/2" | 847877013418 |
| 330124 | 3/4" | 847877013463 |
| 330125 | 1" | 847877018154 |
| 330126 | 1-1/4" | 847877018222 |
| 330127 | 1-1/2" | 847877018239 |
| 330128 | 2" | 847877018451 |
Technical Specifications
| Brand | Charman Inc. |
|---|---|
| Product Type | Copper 90 Degree Short Radius Street Elbow |
| Material | Copper |
| Angle | 90 Degrees |
| Radius | Short Radius (SR) |
| Connection Type | FTG x C |
| Joining Method | Solder / Sweat |
Understanding the FTG x C Connection
FTG End
The fitting-size end is designed to insert directly into the cup of a compatible copper fitting. This allows fittings to be connected without adding a short intermediate section of copper tube.
Cup End
The cup connection receives compatible copper tube and is joined using standard solder / sweat installation methods.
Why Use a Short Radius Street Elbow?
Compact 90° Turn
The short-radius body creates a tight directional change where installation space is limited.
Direct Fitting Connection
The FTG end can connect directly to another compatible copper fitting, helping shorten the overall piping assembly.
Fewer Components
The street configuration can eliminate an intermediate piece of copper tube in certain fitting-to-fitting connections.
Common Applications
Plumbing & Mechanical Systems
- Copper tube installations
- Water distribution piping
- Mechanical piping systems
- Equipment connections
- Repair and maintenance work
Space-Constrained Installations
- Tight 90-degree turns
- Closely spaced fittings
- Wall and ceiling cavities
- Mechanical rooms
- Compact equipment piping
How to Select the Correct Street Elbow
- Match the fitting to the nominal copper tube size used in the piping system.
- Confirm that a 90-degree directional change is required.
- Verify that the installation requires an FTG x C street elbow rather than a standard C x C elbow.
- Confirm that the short-radius configuration provides the appropriate clearance for the installation.
Installation Guidance
- Verify the nominal copper size and connection configuration before installation.
- Inspect mating surfaces for damage or contamination.
- Cut copper tube square and remove burrs where applicable.
- Clean mating surfaces and apply appropriate flux before soldering.
- Fully seat each connection before heating the joint.
- Use proper soldering procedures for copper piping and fittings.
- Allow completed joints to cool before disturbing the assembly.
- Test the completed piping system for leakage before placing it into service.
Our pipe and fitting specialists can help review your copper tube size, FTG x C connection requirements, short-radius elbow configuration, piping layout, and application before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What does FTG x C mean?
FTG identifies a fitting-size end that inserts into a compatible copper fitting cup, while C identifies a cup connection that receives compatible copper tube.
What does short radius mean?
A short-radius elbow uses a more compact bend geometry than a longer-radius fitting, making it useful where installation space is limited.
How is a street elbow different from a standard copper elbow?
A street elbow has a fitting-size connection on one end and a cup connection on the other. A standard copper elbow typically has cup connections on both ends.
Why use the FTG end instead of another cup connection?
The FTG end can insert directly into another compatible fitting. In certain piping layouts, this creates a more compact assembly and eliminates the need for a short piece of copper tube between fittings.
How are these copper street elbows installed?
They are designed for solder / sweat installation using appropriate copper tube preparation, cleaning, flux, soldering, and system testing procedures.
Important Ordering Notes
- Confirm the required nominal copper tube size before ordering.
- Verify that your installation requires an FTG x C street elbow rather than a standard cup-to-cup elbow.
- Confirm that a short-radius 90-degree configuration is appropriate for the piping layout.
- Select the appropriate variation from the product options above.
