Wrot Copper 90° Street Elbow – FTG x C

Product Highlights

• Domestic wrot copper construction
• Fitting end x copper sweat connection
• Provides a compact 90-degree directional change
• Street fitting end inserts directly into another copper fitting
• Female copper sweat socket accepts properly sized copper tube
• Helps reduce overall fitting count and installation space
• Designed for soldered copper pressure-piping systems
• Available in nominal sizes from 1/4" through 4"
• Suitable for plumbing, mechanical, HVAC, maintenance, and repair applications

The fitting end of the street elbow inserts directly into the female copper sweat socket of another compatible fitting. The opposite female copper sweat socket fits over properly sized copper tube. After the mating surfaces are cleaned and prepared, both connections are soldered or brazed to create a permanent 90-degree directional change.

Because the street end connects directly into another fitting, this configuration can eliminate the need for an additional short section of copper tube between two fittings.

• Confirm the required nominal copper tube size before installation.
• Verify which connection is the fitting end and which connection is the female copper sweat socket.
• Insert the fitting end only into a properly sized copper fitting socket.
• Insert properly sized copper tube fully into the female copper sweat socket.
• Clean and prepare all copper mating surfaces before assembly.
• Use approved flux, solder, brazing alloy, and joining procedures for the application.
• Heat the joint evenly and avoid overheating the copper fitting.
• Protect nearby valves, seals, insulation, and equipment from excessive heat.
• Support connected piping to avoid mechanical strain on the street elbow.
• Pressure-test and inspect completed joints before placing the system into service.

Available nominal sizes include:

• 1/4"
• 3/8"
• 1/2"
• 5/8"
• 3/4"
• 1"
• 1-1/4"
• 1-1/2"
• 2"
• 2-1/2"
• 3"
• 4"