Description
Cleaner-65 Clear
Spears® Manufacturing CLEANER-65 Clear is a water-thin, low VOC general-purpose cleaner recommended for preparing PVC, CPVC, ABS, and Styrene pipe and fitting surfaces before solvent-cement joining.
CLEANER-65 helps remove dirt, oil, and grease from bonding surfaces before priming or before using an approved one-step cement that does not require primer. It is suitable for all sizes, classes, and schedules of compatible PVC, CPVC, ABS, and Styrene pipe and fittings.
Product Highlights
- Clear cleaner
- Water-thin consistency
- Low VOC formulation
- General-purpose surface cleaner
- Removes dirt, oil, and grease
- Compatible with PVC, CPVC, ABS, and Styrene
- Prepares bonding surfaces before primer or one-step cement
- Suitable for all sizes, classes, and schedules of compatible piping
Technical Specifications
| Product Type | Low VOC Pipe & Fitting Cleaner |
|---|---|
| Manufacturer | Spears® Manufacturing |
| Product Series | CLEANER-65 |
| Color | Clear |
| Consistency | Water Thin |
| Specific Gravity | 0.800 ± 0.04 |
| Compatible Materials | PVC, CPVC, ABS & Styrene |
| Size Compatibility | All Sizes |
| Pipe Compatibility | All Classes & Schedules |
| Primary Function | Removes Dirt, Oil & Grease from Bonding Surfaces |
| Application | Use Before Priming or Before an Approved One-Step Cement |
| Maximum VOC Emissions | 550 g/L per SCAQMD Rule 1168/316A |
| Shelf Life | 3 Years from Date Stamped on Container |
| Compliance | SCAQMD Rule 1168/316A |
| Certification | UL 2818 GREENGUARD GOLD |
Surface Preparation Before Joining
CLEANER-65 is designed to remove dirt, oil, and grease from compatible pipe and fitting bonding surfaces before the priming and solvent-cement joining process begins.
Cleaning the surfaces helps provide a properly prepared area for the appropriate primer and solvent cement, while also removing contaminants that may otherwise interfere with the joining procedure.
PVC, CPVC, ABS & Styrene Compatibility
CLEANER-65 is a general-purpose cleaner for PVC, CPVC, ABS, and Styrene pipe and fittings, making it useful when several compatible thermoplastic piping materials are handled on the same project.
The cleaner is suitable for all sizes, classes, and schedules of these materials, eliminating the need to select the cleaner according to the nominal pipe size or schedule.
Use Before Primer or One-Step Cement
CLEANER-65 is excellent for cleaning compatible pipe and fitting surfaces before applying the appropriate primer and can also be used before an approved one-step cement where primer is not required.
It is important to remember that CLEANER-65 is a cleaner only. It does not soften the joining surfaces like a primer and does not replace the solvent cement required to create the finished connection.
Cleaner Only — Not a Primer or Cement
CLEANER-65 should be treated strictly as a surface-cleaning product. Where the selected piping system requires primer, the correct primer must still be applied after cleaning, followed by the appropriate solvent cement.
Always follow the joining requirements for the specific PVC, CPVC, ABS, or Styrene system because primer and solvent-cement requirements can differ according to the material, application, and selected cement.
Installation & Selection Considerations
- Use as a cleaner only.
- Keep the container tightly sealed.
- Confirm the piping material before use.
- Remove visible dirt, oil, and grease from bonding surfaces.
- Use the appropriate primer and solvent cement required for the selected piping system.
Review the supplied Spears® documents for additional CLEANER-65 specifications, PVC, CPVC, ABS and Styrene compatibility, surface-preparation guidance, product characteristics, storage requirements, and proper use before priming or solvent-cement joining.
Need Help Selecting Pipe Cleaner, Primer & Cement?
Our product specialists can help review your PVC, CPVC, ABS, or Styrene piping material, application, primer requirements, and solvent-cement selection to make sure you have the appropriate products for each step of the joining process.
Frequently Asked Questions
What is CLEANER-65 used for?
CLEANER-65 is used to remove dirt, oil, and grease from compatible plastic pipe and fitting bonding surfaces before priming or solvent-cement joining.
What materials can CLEANER-65 be used with?
Spears® CLEANER-65 is suitable for compatible PVC, CPVC, ABS, and Styrene pipe and fittings.
What sizes can CLEANER-65 be used with?
CLEANER-65 is a general-purpose cleaner suitable for all sizes, classes, and schedules of PVC, CPVC, ABS, and Styrene pipe and fittings.
Is CLEANER-65 a primer?
No. CLEANER-65 is a cleaner only. When the piping system requires primer, the appropriate primer must still be applied after the surfaces have been cleaned.
Is CLEANER-65 a solvent cement?
No. CLEANER-65 does not replace solvent cement. The correct solvent cement must be selected and applied according to the requirements of the piping material and system.
Can CLEANER-65 be used before one-step cement?
Yes. Spears® identifies CLEANER-65 as suitable for cleaning pipe before the use of an approved one-step cement that does not require primer.
Why should the container remain tightly sealed?
The solvents can evaporate after the container is opened. Keeping the can tightly sealed between uses helps preserve the cleaner and its intended performance.
What is the shelf life of CLEANER-65?
CLEANER-65 has a specified shelf life of three years from the date stamped on the bottom of the container when properly stored and tightly sealed between uses.
Important Ordering & Installation Notes
- Do not add solvents to the cleaner.
- Check the container date before use.
- Seal the container tightly between applications.
- Remember that CLEANER-65 does not replace primer or cement.
- Follow the specified joining procedure for the selected piping material and application.
