Braxton Harris

3/8" Universal Cast Top Beam Clamp 3/8" rod size. UL Listed, FM approved. Black finish. Maximum recommended load: 400 LBS. Malleable iron casting with a hardened cup point set screw and lock nut. Recommended for attaching hanger rod to top or bottom...

3/8" Wrot Cap 3/8" Copper Sweat "“ Wrot Copper

3/8" x 1 /4" (CXC) Wrot Copper 90 Degree Elbow 3/8" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 1" Hex Head Lag Screw (Zinc Plated)

3/8" x 1-1/2" Black Iron Nipple Meets ASTM A-53 Specs

3/8" x 1-1/2" Hex Head Lag Screw (Zinc Plated)

3/8" X 1/2" (C X FPT) Wrot Female Adapter 3/8" Copper Sweat X 1/2" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 1/2" (C X MPT) Wrot Male Adapter 3/8" Copper Sweat x 1/2" Male Pipe Threads "“ Wrote Copper "“ IAPMP Approved "“ NSF Approved

3/8" X 1/4" (C X FPT) Wrot Female Adapter 3/8" Copper Sweat X 1/4" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (C X MPT) Wrot Male Adapter 3/8" Copper Sweat X 1/4" Male Pipe Threads - Wrot Copper - IAPMO APPROVED - NSF APPROVED

3/8" X 1/4" (CXC) Wrot Reducer Coupling 3/8" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (FTG X C) Wrot Fitting Reducer 3/8" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (FTG X C) Wrot Flush Bushing 3/8" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" Flare Brass Short Forged Reducing Nut Style 41. 3/8" flare threads x 1/4" outside threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases including gasoline, grease, oil, water,...

3/8" x 1/4" OD Plastic Push-on Reducing Coupling

3/8" X 1/8" (CXC) Wrot Reducer Coupling 3/8" Copper Sweat X 1/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/8" (FTG X C) Wrot Fitting Reducer 3/8" Fitting X 1/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 10' Plain All Threaded Steel Rod 3/8" DIAMETER X 10' LENGTH. PLAIN FINISH.

3/8" x 10' Plated All Threaded Steel Rod 3/8" DIAMETER X 10' LENGTH. PLATED FINISH.

3/8" x 16 TPI Drop-in Anchor

3/8" x 2" Black Iron Nipple Meets ASTM A-53 Specs

3/8" x 2" Hex Head Lag Screw (Zinc Plated)

3/8" x 2-1/2" Hex Head Lag Screw (Zinc Plated)

3/8" x 3" Hex Head Lag Screw (Zinc Plated)

3/8" X 3' Toilet Cleaning Tool ZINC PLATED STEEL. STEEL TUBE. CLOSET AUGER.  

3/8" x 3-1/2" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

3/8" X 3/8" Brass Hose Barb Splicer 3/8" BARB (HOSE ID) X 3/8" BARB (HOSE ID)

3/8" X 3/8" X 1/2" (C X C X C) Wrot Tee 3/8" Copper Sweat X 3/8" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 3/8" X 1/4" (C X C X C) WROT TEE 3/8" Copper Sweat X 3/8" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 3/8" x 1/4" Flare Brass Reducing Tee 3/8" X 3/8" X 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" X 3/8" X 1/4" OD Brass Compression Tee 3/8" X 3/8" X 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

3/8" x 4" Spring Wing Toggle Bolt w/ Wingnut (Zinc Plated) 3/8" DIAMETER. 4" LENGTH. ZINC PLATED.

3/8" x 6" Acid Brush #1 FOR SOLDERING, GLUEING, PAINTING, CLEANING, ETC.

3/8" x 6" Masonry Drill Bit BIT SIZE: 3/8″, BIT LENGTH: 6″. DESIGNED FOR PERCUSSION AND ROTARY DRILLING IN CONCRETE, BRICK, MARBLE, STONE, WALL BOARD OR PLASTER. TUNGSTEN CARBIDE TIPS. 1/4″ REDUCED SHANK.  

3/8" x 6" Spring Wing Toggle Bolt w/ Wingnut(Zinc Plated) 3/8" DIAMETER. 6" LENGTH. ZINC PLATED.

3/8" x 6' Plain All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLAIN FINISH.

3/8" x 6' Plated All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLATED FINISH.

3/8" x Close Black Iron Nipple Meets ASTM A-53 Specs

3/8" Zinc Plated Flat Washer (100pcs/bag) 3/8" Inside Diameter. Zinc Plated Finish.

3/8"OD x 1/4"ID x 100' Polyethelene Tubing 100 FEET OF 100% VIRGIN POLYETHELENE. LOW DENSITY. NON-TOXIC. 3/8" OD, 1/4" ID, 1/16" WALL THICKNESS, 125 PSI WORKING PRESSURE AT 70 DEGREES FERENHEIT