Braxton Harris

3/8" Steel Pex Clamp MEETS OR EXCEEDS REQUIREMENT OF ASTM F2098

3/8" Threaded Yellow Brass Close Nipple

3/8" Threaded Yellow Brass Square Head Plug- Lead Free

3/8" Toe Touch Cartridge/ Stopper- Chrome Plated. 3/8″ Brass stem.  

3/8" Universal Cast Top Beam Clamp 3/8" rod size. UL Listed, FM approved. Black finish. Maximum recommended load: 400 LBS. Malleable iron casting with a hardened cup point set screw and lock nut. Recommended for attaching hanger rod to top or bottom...

3/8" Wrot Cap 3/8" Copper Sweat "“ Wrot Copper

3/8" x 1 /4" (CXC) Wrot Copper 90 Degree Elbow 3/8" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 1" Hex Head Lag Screw (Zinc Plated)

3/8" x 1-1/2" Hex Head Lag Screw (Zinc Plated)

3/8" X 1/2" (C X FPT) Wrot Female Adapter 3/8" Copper Sweat X 1/2" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 1/2" (C X MPT) Wrot Male Adapter 3/8" Copper Sweat x 1/2" Male Pipe Threads "“ Wrote Copper "“ IAPMP Approved "“ NSF Approved

3/8" X 1/4" (C X FPT) Wrot Female Adapter 3/8" Copper Sweat X 1/4" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (C X MPT) Wrot Male Adapter 3/8" Copper Sweat X 1/4" Male Pipe Threads - Wrot Copper - IAPMO APPROVED - NSF APPROVED

3/8" X 1/4" (CXC) Wrot Reducer Coupling 3/8" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (FTG X C) Wrot Fitting Reducer 3/8" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" (FTG X C) Wrot Flush Bushing 3/8" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/4" Flare Brass Short Forged Reducing Nut Style 41. 3/8" flare threads x 1/4" outside threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases including gasoline, grease, oil, water,...

3/8" x 1/4" OD Plastic Push-on Reducing Coupling

3/8" X 1/8" (CXC) Wrot Reducer Coupling 3/8" Copper Sweat X 1/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 1/8" (FTG X C) Wrot Fitting Reducer 3/8" Fitting X 1/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 10' Plain All Threaded Steel Rod 3/8" DIAMETER X 10' LENGTH. PLAIN FINISH.

3/8" x 10' Plated All Threaded Steel Rod 3/8" DIAMETER X 10' LENGTH. PLATED FINISH.

3/8" x 16 TPI Drop-in Anchor

3/8" x 2" Hex Head Lag Screw (Zinc Plated)

3/8" x 2-1/2" Hex Head Lag Screw (Zinc Plated)

3/8" x 3" Hex Head Lag Screw (Zinc Plated)

3/8" X 3' Toilet Cleaning Tool ZINC PLATED STEEL. STEEL TUBE. CLOSET AUGER.  

3/8" X 3/8" Brass Hose Barb Splicer 3/8" BARB (HOSE ID) X 3/8" BARB (HOSE ID)

3/8" X 3/8" X 1/2" (C X C X C) Wrot Tee 3/8" Copper Sweat X 3/8" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 3/8" X 1/4" (C X C X C) WROT TEE 3/8" Copper Sweat X 3/8" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 3/8" x 1/4" Flare Brass Reducing Tee 3/8" X 3/8" X 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" x 4" Spring Wing Toggle Bolt w/ Wingnut (Zinc Plated) 3/8" DIAMETER. 4" LENGTH. ZINC PLATED.

3/8" x 6" Acid Brush #1 FOR SOLDERING, GLUEING, PAINTING, CLEANING, ETC.

3/8" x 6" Masonry Drill Bit BIT SIZE: 3/8″, BIT LENGTH: 6″. DESIGNED FOR PERCUSSION AND ROTARY DRILLING IN CONCRETE, BRICK, MARBLE, STONE, WALL BOARD OR PLASTER. TUNGSTEN CARBIDE TIPS. 1/4″ REDUCED SHANK.  

3/8" x 6" Spring Wing Toggle Bolt w/ Wingnut(Zinc Plated) 3/8" DIAMETER. 6" LENGTH. ZINC PLATED.

3/8" x 6' Plated All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLATED FINISH.

3/8" Zinc Plated Flat Washer (100pcs/bag) 3/8" Inside Diameter. Zinc Plated Finish.

30 lb Gas Test Gauge Assembly w/ 1" FIP Connection Steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 1" FPT inlet.

30 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

30" Plastic Water Heater Pan Drilled w/ Fitting BOTTOM ID: 30", TOP ID: 31-1/2", 1" ADAPTER HOOK UP.