Braxton Harris

4 -1/4" OD Strainer w/ 3-3/8" Screw Holes- Chrome Plated 4-1/4" Outside Diameter. 3-3/8" Screw hole to Screw hole centers. Comes w/ finished screws.

4 -1/4" OD Strainer w/ 3-3/8" Screw Holes- PVD Polished Nickel 4-1/4" Outside Diameter. 3-3/8" Screw hole to Screw hole centers. Comes w/ finished screws.

4 -1/4" OD Strainer w/ 3-3/8" Screw Holes- PVD Satin Nickel 4-1/4" Outside Diameter. 3-3/8" Screw hole to Screw hole centers. Comes w/ finished screws.

4 -way Screwdriver Phillips Replacement Bit -1pc - 3/16" 1/4" Slotted Phillips Bit

4 in 1 Spud Wrench FITS CLOSET SPUDS, SLIP NUTS, LOCK NUTS.  

4 lb. Box of Rags 4 LB. BOX-OF-RAGS

4 oz. Self Cleaning Flux Paste Water soluble. Meets ASTM-B813. All weather formula. Cleans as it solders. Non-toxic, non-acid, lead free. Contains no zinc chloride. Use with all lead free and common soft solder. Meets Mil. Spec F-4995 Type 11.

4 OZ. STIC-O-STEEL REPAIR (STEEL REINFORCED EPOXY PUTTY); WHITE SETS UP IN 4-5 MINUTES. BECOMES STEEL HARD IN 15 MINUTES  

4" (C X C X C) Wrot Tee 4" Copper Sweat X 4" Copper Sweat X 4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" (C X MPT) WROT MALE ADAPTER 4″ COPPER SWEAT X 4″ MALE PIPE THREADS. WROT COPPER.  

4" (CXC) Wrot Coupling Less Tube Stop 4" Copper Sweat X 4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ UL Listed

4" (CXC) Wrot Coupling w/ Rolled Tube Stop 4" Copper Sweat X 4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" (FTG X C) Wrot 45 Degree Street Elbow 4" Fitting X 4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" (FTG X C) Wrot 90 Degree Street Elbow 4" Fitting X 4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" (plug) x 7" Extension Clean-out Cover Set 4″ IPS COUNTERSUNK BRASS PLUG DRILLED AND TAPPED FOR 1/4″ – 20 BOLT. 7″ 24 GAUGE STAINLESS STEEL WALL ACCESS COVER. FURNISHED WITH 1/4″-20 X 4″ FLAT HEAD MACHINE SCREW...

4" Aluminum 90 Degree Elbow

4" Aluminum Roof Flashing FITS 3" PIPE. HEIGHT OF BOOT: 3". FLANGE SIZE: 10-3/4" X 12-1/2". COMPLETELY WATERPROOF AND LEAKPROOF. WILL NOT CRACK, CHIP OR PEEL. ADJUSTABLE TO MOST PITCHED ROOFS. UPC, BOCA & SBCCI APPROVED.

4" Basket Strainer Washer Kit 1pc vinyl washer (#DBSW-4) & 1pc galvanized (#DBSFW4) washers.

4" Bolt Type Light Duty Clevis Hanger for Iron Pipe (plain finish) Fits 4" Iron Pipe "“ Maximum Load: 600 LBS "“ UL LIisted. FM approved "“ Meets federal specifications: WW-H-171 (Type 1), MSS-SP-69 (Type 1) "“ Plain finish

4" Brass Closet Flange (14oz) 4″ pipe size. 14 oz., straight, for lead connection

4" Brass Closet Flange (Heavy) 16oz 4" pipe size. Heavy brass. For lead connection

4" Cast Iron Cleanout w/ 3" Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3″ COUNTERSUNK SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" CAST IRON CLEANOUT W/ 3" HEAVY R.H. BRASS PLUG STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3″ RAISED HEAD HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" Cast Iron Cleanout w/ 3" Raised Head Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3″ RAISED HEAD SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" Cast Iron Cleanout w/ 3-1/2" Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3-1/2″ COUNTERSUNK SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" Cast Iron Cleanout w/ 3-1/2" Heavy Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3-1/2″ COUNTERSUNK HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" CAST IRON CLEANOUT W/ 3-1/2" HEAVY R.H. BRASS PLUG STANDARD BODY CLEANOUT (PLAIN END). FITS 4" PIPE SIZE. 3-1/2" RAISED HEAD HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" Cast Iron Cleanout w/ 3-1/2" New Orleans Raised Head Plug Standard body cleanout (plain end). Fits 4″ pipe size. 3-1/2″ raised head New Orleans Code plug. For service weight or no hub connections.

4" Cast Iron Cleanout w/ 3-1/2" Raised Head Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3-1/2″ RAISED HEAD SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4" Cast Iron No Hub Cleanout w/ 3-1/2" Countersunk Brass Plug NO HUB CLEANOUT. FITS 4″ PIPE SIZE. 3-1/2″ COUNTERSUNK SOUTHERN CODE PLUG SIZE.

4" Cast Iron No Hub R w/ 3-1/2" Raised Head Brass Plug 4″ CAST IRON NO HUB CLEANOUTS W/ 3-1/2″ R.H. BRASS PLUG-NO HUB CLEANOUT. FITS 4″ PIPE SIZE. 3-1/2″ RAISED HEAD SOUTHERN CODE PLUG SIZE.

4" Cast Iron Tapped Screw Ferrule w/ 3" Tapping Size Fits 4″ pipe size. 3″ tapping size. Long pattern with 4″ height. Plain end. Standard weight. Does not come with a plug. Meets ASTM A-74. Made of HT200 cast iron.  

4" Cast Iron Tapped Screw Ferrule w/ 3-1/2" Tapping Size Fits 4″ pipe size. 3-1/2″ tapping size. Long pattern with 4″ height. Plain end. Standard weight. Does not come with a plug. Meets ASTM A-74. Made of HT200 cast iron.  

4" Cleanout and Drain Ring- Chrome Plated Fits 4-1/4" diameter drain and cleanout spuds. and 3"x4" general purpose drains.

4" Cleanout and Drain Ring- Nickel Bronze Fits 4-1/4" diameter drain and cleanout spuds. and 3"x4" general purpose drains.

4" Cleanout and Drain Ring- Polished Brass Fits 4-1/4" diameter drain and cleanout spuds. and 3"x4" general purpose drains.

4" Diameter 24 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 4″ DIAMETER WALL ACCESS COVER WITH CHROME PLATED BOLT. BOLT HAS 1/4″ THREADS X 4″ LENGTH.

4" Dielectric Insulation Kit

4" Dual-Tite Gasket Service Weight (Meets ASTM Standard C564) Service weight gasket.

4" DWV PVC Floor Sink Base Only (less strainer/grate)