Braxton Harris

3/8" x 3" Hex Head Lag Screw (Zinc Plated)

3/8" X 3' Toilet Cleaning Tool ZINC PLATED STEEL. STEEL TUBE. CLOSET AUGER.  

3/8" x 3-1/2" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

3/8" X 3/8" Brass Hose Barb Splicer 3/8" BARB (HOSE ID) X 3/8" BARB (HOSE ID)

3/8" X 3/8" X 1/2" (C X C X C) Wrot Tee 3/8" Copper Sweat X 3/8" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" X 3/8" X 1/4" (C X C X C) WROT TEE 3/8" Copper Sweat X 3/8" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

3/8" x 3/8" x 1/4" Flare Brass Reducing Tee 3/8" X 3/8" X 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

3/8" X 3/8" X 1/4" OD Brass Compression Tee 3/8" X 3/8" X 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

3/8" x 4" Spring Wing Toggle Bolt w/ Wingnut (Zinc Plated) 3/8" DIAMETER. 4" LENGTH. ZINC PLATED.

3/8" x 6" Acid Brush #1 FOR SOLDERING, GLUEING, PAINTING, CLEANING, ETC.

3/8" x 6" Masonry Drill Bit BIT SIZE: 3/8″, BIT LENGTH: 6″. DESIGNED FOR PERCUSSION AND ROTARY DRILLING IN CONCRETE, BRICK, MARBLE, STONE, WALL BOARD OR PLASTER. TUNGSTEN CARBIDE TIPS. 1/4″ REDUCED SHANK.  

3/8" x 6" Spring Wing Toggle Bolt w/ Wingnut(Zinc Plated) 3/8" DIAMETER. 6" LENGTH. ZINC PLATED.

3/8" x 6' Plated All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLATED FINISH.

3/8" x Close Black Iron Nipple Meets ASTM A-53 Specs

3/8" Zinc Plated Flat Washer (100pcs/bag) 3/8" Inside Diameter. Zinc Plated Finish.

30 lb Gas Test Gauge Assembly w/ 1" FIP Connection Steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 1" FPT inlet.

30 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

30" Plastic Water Heater Pan Drilled w/ Fitting BOTTOM ID: 30", TOP ID: 31-1/2", 1" ADAPTER HOOK UP.

30" TOWEL BAR W/ CONCEALED SCREW- CHROME PLATED CHROME PLATED ZINC DIE CAST. COMES W/ SCREW. BAR IS 5/8" SQUARE. QUICK INSTALLATION.

30" Universal Thermocouple All copper with brass fittings. Adaptable to five different pilot valves. Available in five lengths. Kit includes two clips and nuts. Works with most gas furnaces and water heaters. Also fits Miller and Coleman mobile home...

30" x 30" Galvanized Water Heater Pan Drilled w/ Fitting 24 Gauge GALVANIZED. 4" DEEP. 30" X 30". 1" ADAPTER HOOK UP.

30' 4-1/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 4-1/8" ID X 1/2" WALL THICKNESS

30' Pipe Heating Cable / Heat Tape 210 WATTS. 120 VOLTS. UL LISTED. PREVENTS FROZEN WATER PIPES. FOR METAL OR RIGID PLASTIC PIPE. BUILT-IN AUTOMATIC THERMOSTAT AND PILOT LIGHT. USES LESS ENERGY DUE TO LOW WATTAGE. 7 WATTS PER FOOT.

300 lb. Water Test Gauge 2-1/2″ Shatterproof face with steel case. 3/4″ female hose thread connection with rubber washer.  

300' 5/8" ID x 1/2" Wall Self Seal Pipe Insulation, 50 Per Carton 5/8" ID x 1/2" Wall Thickness. 6 Foot Lengths. Fits 1/2" CTS, 3/8" IPS. R Factor: 3.2. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

300' 5/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 1/2" WALL THICKNESS

324' 5/8" ID x 1/2" Wall Seamless Rubber Pipe Insulation, 54 Per Carton 5/8" ID x 1/2" Wall Thickness. 6 Foot Lengths. Fits 1/2" CTS, 3/8" IPS. R Factor: 3.3. Flame Spread Rating & Smoke Rating: <25/50. Will Not Contribute Significantly To Fire...

330' 3/4" ID X 3/8" WALL SEMI-SLIT PIPE INSULATION SEMI-SLIT POLY. INSULATION3/4" ID X 3/8" WALL THICKNESS

34" Duct Strap for HVAC Natural colored nylon used in HVAC applications. Works with up to 10" diameter. Bag quantity of 25pcs. Sold per piece.

35 oz. 6' Hand Water Pump w/ 6' Discharge Hose Made of high impact, none sparking PVC. Hose is 6′ length and 1-1/4″ diameter. Pump is 3′ length and 1-3/4″ diameter 35 oz. of water per stroke. 4 strokes removes 1 gallon of water...

3500W 240V ROUND HEAD ELEMENT

3500W 240V Screw-in Element for Water Heater- Bagged “S” MODEL ELEMENTS- THREADED, 3500 WATT (HIGH DENSITY), 240 VOLT, TANK DIAMETER 12″. COMES WITH RUBBER GASKET

36" Adjustable Ceiling Support For 1" Shower Rod COMES WITH 36″ ROD, FLANGE, 1″ RING & SCREWS  

36" Cable Saw (PVC Pipe Saw) 36″ LENGTH. CUTS PVC PIPE. FOR TIGHT SPOTS WHERE A CONVENTIONAL PVC SAW WILL NOT FIT.  

36" Length w/ T-grip Handle CUTS PVC PIPE. FOR TIGHT SPOTS WHERE A CONVENTIONAL PVC SAW WILL NOT FIT.

36" Universal Thermocouple All copper with brass fittings. Adaptable to five different pilot valves. Available in five lengths. Kit includes two clips and nuts. Works with most gas furnaces and water heaters. Also fits Miller and Coleman mobile home...

36' 3-1/2" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 3-1/2" ID X 1/2" WALL THICKNESS

396' 5/8" ID x 3/8" Wall Self Seal Pipe Insulation, 66 Per Carton 5/8" ID x 3/8" Wall Thickness. 6 Foot Lengths. Fits 1/2" CTS, 3/8" IPS. R Factor: 2.9 Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

396' 5/8" ID X 3/8" WALL SEMI-SLIT PIPE INSULATION 5/8" ID X 3/8" WALL THICKNESS

4 -1/4" OD Snap -in Strainer (2-7/8" prong)- PVD Satin Bronze 4-1/4" Outside diameter. 2-7/8" Prong to Prong. Fits #NCSD2, BNCSD2 and SWSSD2