B7RMP-R250150 - Clamp Reducing Tee

Product Highlights

• Genuine Dixon sanitary clamp reducing tee
• Manufacturer part number B7RMP-R250150
• 2-1/2" x 1-1/2" tube O.D. configuration
• 316L stainless steel construction
• 2-1/2" main run with 1-1/2" reduced branch
• Three sanitary clamp connections
• Designed for hygienic and sanitary process piping
• Published dimension A: 2.84"
• Published dimension B: 2.66"
• Older published overall run length: 5.688"
• 304 stainless steel equivalent: B7RMP-G250150
• Part of Dixon's B7RMP Clamp Reducing Tee family

The B7RMP-R250150 combines a straight 2-1/2" sanitary run with a reduced 1-1/2" sanitary branch.

This configuration allows a 1-1/2" process line to branch from a larger 2-1/2" main line without requiring a separate reducer at the branch connection.

All three ports use sanitary clamp-style connections, allowing the fitting to be assembled with compatible mating sanitary components and removed when access is required.

The B7RMP-R250150 is manufactured from 316L stainless steel. This material is commonly selected for hygienic process systems where corrosion resistance, cleanability, and compatible stainless steel construction are important.

316L stainless steel is frequently used in compatible food, beverage, dairy, pharmaceutical, brewery, winery, and other sanitary process applications.

Final material suitability depends on the process fluid, concentration, temperature, cleaning chemistry, sanitation procedures, and surrounding operating environment.

Dixon identifies B7RMP-R250150 as a 2-1/2" x 1-1/2" tube O.D. reducing tee. The 2-1/2" size applies to the straight main run, while the 1-1/2" size applies to the reduced branch.

Sanitary fitting sizes are based on tube outside diameter. Do not automatically substitute conventional nominal pipe sizing when selecting this fitting.

Before ordering, confirm the existing sanitary tube O.D., mating clamp geometry, stainless steel grade, gasket requirements, and available installation space.

Dixon's hygienic fittings catalog identifies the B7RMP Clamp Reducing Tee family in connection with 3-A Sanitary Standard 63-04 and authorization number 621.

Confirm any application-specific sanitary, regulatory, material-certification, documentation, installation, or inspection requirements for the complete system before placing the fitting into service.

Before installation, confirm the B7RMP-R250150 part number, 2-1/2" main-run size, 1-1/2" branch size, and 316L stainless steel material.

Inspect all three clamp connection faces for contamination, scratches, dents, deformation, or other damage that could interfere with gasket sealing.

Install correctly sized sanitary gaskets between the mating connection faces. Select gasket material according to the process fluid, temperature, cleaning chemistry, sanitation procedures, and other system requirements.

Align the connected piping and equipment before installing and tightening the sanitary clamps. Do not use the clamps or reducing tee to pull misaligned piping into position.

Properly support the main run and branch piping so unnecessary external loads, vibration, or equipment weight are not transferred to the fitting and clamp joints.

After assembly, inspect each connection and verify leak-free operation under appropriate process conditions before returning the system to normal service.