Blasting Pot Replacement Parts & Service Kits

Valve Washer for Allredi 2-Hole Junior Mixing Valve. Two required per valve. Valve Washer Fits Allredi 2-Hole Junior Mixing Valve Two required Documents: Allredi 2-Hole Junior Mixing Valve - Part Numbers & Schematics Guide - 106M431 Allredi...

Rubber Liner for 3/4" ID Abrasive Blasting Hose

Jr./Sr. Spindle Packing Gland

3/4" ID x 50 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L366HE

Shut-off Bolt for Blastmaster® 153 Remote Control Valve  

Valve Body for Blastmaster® 153 Remote Control Valve  

1/2" NPT Full Port Ball Valve. Assembly part for Allred L-Series Blast Pots. 1/2" NPT Full Port Ball Valve

Hose End Fitting for 1/2" ID Blast Hose Male hose end Fitting for 1/2" ID blast hose Steel For L-Series setups  Internal hose end x threaded male end

Inspection Door Gasket for Allredi 6" x 8" inspection doors Inspection Door Gasket Fits Allredi 6" x 8" Inspection Doors Documents: Allredi 6.5 M-Series Blast Pots - Part Numbers & Schematics Guide - 106M058  

3/8-24 x 1-1/4" Grade 5 Bolt

Spindle Bushing for Blastmaster® 153 Remote Control Valve  

Nozzle Cap for Type I Ceramic Nozzles. Fits the Allredi 153 Remote Control Valve. Nozzle Cap for Allredi 153 Remote Control Valve For use with Type I Ceramic Nozzles Documents: Allredi 153 Remote Control Valve - Part Numbers & Schematics...

Jr./Sr. Spindle Packing

Spindle O-Ring for Blastmaster® 153 Remote Control Valve  

1/8" Male NPT Petcock for small moisture separators commonly mounted on Allredi L-Series Blast Pots 1/8" Male NPT Petcock

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. 1" GateKeeper Air Valve Documents: Allredi GateKeeper Air Valve - Part Numbers & Schematics Guide - 106M423

1/2" ID x 50 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

2 and 4 Hole Jr. - Cover Bolt without Pin

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" High Flow GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E Remote Control Systems and has a larger...

1/2-20 Hex Nut

6" x 8" Inspection Door Assembly for Allredi Blast Pots 6" x 8" Inspection Door Assembly Red Includes door, bolt, nut, and brace Documents: Allredi 6.5 M-Series Blast Pots - Part Numbers & Schematics Guide - 106M058

Jr./Sr. Valve Control Arm

Blow Down Assembly  

Valve Disc Stem for Allredi 153 Remote Control Valve Valve Disc Stem Fits Allredi 153 Remote Control Valve Documents: Allredi 153 Remote Control Valve - Part Numbers & Schematics Guide - 106M034 Allredi 153 Remote Control Valve - Operators...

Spindle Set Screw for Blastmaster® 153 Remote Control Valve  

Moisture Separator .25 - 2.0 Cu. Ft. Abrasive Blasting Pots  

1/2" Flat Washer for 0.35 Cu. Ft. Axle Assembly  

Replacement screen for the Allredi Abraive Trap. The screen traps the small particles escaping the blast pot during depressurization and prolongs the life of the abrasive trap body. Abrasive Trap Screen Documents: Allredi 125P Remote Control...

Spindle E Clip for Blastmaster® 153 Remote Control Valve  

Cover Gasket for Blastmaster® 153 Remote Control Valve  

Valve Spring for 2- and 4-Hole Jr.  

Control Lever Grip - All  

Nut for Spring Bolt for Blastmaster® 153 Remote Control Valve

Valve Spindle for 2- or 4-Hole Jr.  

Pop-up Valve Seat is a black rubber o-ring that is used with pop-up valves inside of blast pots for forming a seal and allowing the blast pot to pressurize. Pop-Up Valve Seat Black Rubber O-Ring

The complete service kit for the Allredi 153 Remote Control Valve includes washers, o-rings, screws, stems, and the shut off arm. See part numbers and schematics guide for a complete list of part numbers and quantities included. Service Kit for...

An Abrasive Trap filters small abrasive particles exhausting from the blast pot, protecting the outlet valve from premature wear. The Allredi Abrasive Trap is a component part in the 125P and 125E Remote Control Systems Abrasive Trap Documents: ...

Socket Head Cap Screw 10-32 X 3/8”

The Service Kit for 1-1/2" High Flow GateKeeper Air Valves replaces the interal nuts, gaskets, o-rings, a disc, and disc plate. See part numbers and schematics guide for a full list of part numbers included. Service Kit for 1-1/2" High Flow...