Blasting Pot Replacement Parts & Service Kits

Valve Washer for Allredi 2-Hole Junior Mixing Valve. Two required per valve. Valve Washer Fits Allredi 2-Hole Junior Mixing Valve Two required Documents:

Internal valve plate for Allredi 2-Hole Junior Mixing Valve Valve Plate for Allredi 2-Hole Junior Mixing Valve Documents:

Hose End Fitting for 1/2" ID Blast Hose Male hose end Fitting for 1/2" ID blast hose Steel For L-Series setups  Internal hose end x threaded male end

A blast pot exhaust muffler reduces the noise and traps particles generated during the depressurization process of a blast pot. Blast Pot Exhaust Muffler Aluminum body Steel Mesh Screen HDPE...

Service kit for Allredi Blast Pot Exhaust Mufflers. Includes three filter elements, one screen, and one 1-1/2" pipe plug. Service Kit for Allredi Blast Pot Exhaust Muffler Documents:

Nozzle washer for ceramic nozzles. Use with nozzle cap 10L100164 to provide a barrier between the ceramic nozzle and the outlet of the Allredi 153 Remote Control Valve. Nozzle Washer for Ceramic...

Complete Allredi 2-Hole Junior Mixing Valve for Allredi L-Series Blast Pots Allredi 2-Hole Junior Mixing Valve, Complete Documents:

Pop-up Valve Seat is a black rubber o-ring that is used with pop-up valves inside of blast pots for forming a seal and allowing the blast pot to pressurize. Pop-Up Valve Seat Black Rubber O-Ring

Service kit for Allredi 2-Hole Junior Mixing Valve. Complete service kit (10L336A) with washers, gaskets, spindles, and springs. Does not include valve plate. See part numbers and schematics guide...

1/8" Male NPT Petcock for small moisture separators commonly mounted on Allredi L-Series Blast Pots 1/8" Male NPT Petcock

Nozzle Cap for Type I Ceramic Nozzles. Fits the Allredi 153 Remote Control Valve. Nozzle Cap for Allredi 153 Remote Control Valve For use with Type I Ceramic Nozzles Documents:

Valve cover with 1/2" NPT for Allredi 2-Hole Junior Mixing Valve Valve cover for Allredi 2-Hole Junior Mixing Valve 1/2" NPT Outlet Documents:

Internal parts service kit for Allredi 2-Hole Junior Mixing Valve. Includes Valve Cover (10L100082) and complete service kit (10L336A) with washers, gaskets, spindles, and springs. See part numbers...

Nozzle Holder Base 1/2" NPT  

1/2" NPT Full Port Ball Valve. Assembly part for Allred L-Series Blast Pots. 1/2" NPT Full Port Ball Valve

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1" GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E...

Control lever bracket for Allredi L-Series Blast Pots. Two required. Control Lever Bracket for Allredi L-Series Blast Pots Two required

Hose Clamp - 3/4" ID Abrasive Blasting Hose  

Inspection Door Gasket for Allredi 6" x 8" inspection doors Inspection Door Gasket Fits Allredi 6" x 8" Inspection Doors Documents:

The Allredi Abrasive Trap Service Kit includes all of the high-wear items Abrasive Trap Service Kit Documents:

Valve Cushion for 2 and 4 Hole Jr.

Valve Spindle for 2- or 4-Hole Jr.  

1/2" ID x 10 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

Replacement screen for the Allredi Abraive Trap. The screen traps the small particles escaping the blast pot during depressurization and prolongs the life of the abrasive trap body. Abrasive Trap...

The complete service kit for the Allredi 153 Remote Control Valve includes washers, o-rings, screws, stems, and the shut off arm. See part numbers and schematics guide for a complete list of part...

1/2" ID x 25 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

Cover Bolt with Pin for 2- and 4-Hole Jr.  

Screw Socket Head 10-32 x 3/4"

Shut-off Bolt for Blastmaster® 153 Remote Control Valve  

Spindle O-Ring for Blastmaster® 153 Remote Control Valve  

The 1” Outlet Valve allows the blast pot to depressurize when the remote control switch is released. This Outlet Valve is a component part in the 125P and 125E Remote Control Systems. 1" Outlet...

Pop-up valve with female external sleeve. Black rubber body, seats with Pop-Up Valve Seat (1006050). Pop-Up Valve, External Black Rubber Body

2 and 4 Hole Jr. - Cover Bolt without Pin

Control Link Pivot Assembly  

Pop-up valve with male internal sleeve. Black rubber body, seats with Pop-Up Valve Seat (1006050) Pop-Up Valve, Internal Black Rubber Body

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" High Flow GateKeeper Air Valve is a component part of the pressure-hold...

The 1-1/2” inlet valve allows a larger volume of air to flow into the blasting system. The Allredi 1-1/2" Inlet Valve is a component part in the 125P and 125E Remote Control Systems. 1-1/2" Inlet...

1-1/4" blast pot pusher line assembly with two 1-1/4" female swivels, two 1-1/4" T-bolt hose clamps, and 3' x 1-1/4" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/4" pipe string. ...

An Abrasive Trap filters small abrasive particles exhausting from the blast pot, protecting the outlet valve from premature wear. The Allredi Abrasive Trap is a component part in the 125P and 125E...

Filler Plug O-Ring for .15 - 6.0 Cu. Ft. Abrasive Blasting Pots