Blasting Pot Replacement Parts & Service Kits

Service Kit for Tandem Remote Control Valve  

Nozzle washer for ceramic nozzles. Use with nozzle cap 10L100164 to provide a barrier between the ceramic nozzle and the outlet of the Allredi 153 Remote Control Valve. Nozzle Washer for Ceramic Nozzles For Allredi 153 Remote Control Valve ...

Hair Pin Clip  

Valve cover with 1/2" NPT for Allredi 2-Hole Junior Mixing Valve Valve cover for Allredi 2-Hole Junior Mixing Valve 1/2" NPT Outlet Documents: Allredi 2-Hole Junior Mixing Valve - Part Numbers & Schematics Guide - 106M431 Allredi 2-Hole...

3/16" X 1" Roll Pin  

5/16" Flat Washer Galvanized

Pop-up Valve Seat is a orange rubber o-ring that is used with pop-up valves inside of blast pots for forming a seal and allowing the blast pot to pressurize. Pop-Up Valve Seat Orange Rubber O-Ring

Service kit for Allredi Blast Pot Exhaust Mufflers. Includes three filter elements, one screen, and one 1-1/2" pipe plug. Service Kit for Allredi Blast Pot Exhaust Muffler Documents: Allredi Bulk Pot Exhaust Muffler - Part Numbers &...

Gatekeeper Air Valve - 2"  

Nozzle Holder Base 1/2" NPT  

Screw Socket Head 10-32 x 3/4"

Tandem Remote Control Valve  

1/8" NPT Pressure Gauge 160 psi

1/2" NPT Union

Rubber Leg Tip for .15 and .35 Cu. Ft.

Internal parts service kit for Allredi 2-Hole Junior Mixing Valve. Includes Valve Cover (10L100082) and complete service kit (10L336A) with washers, gaskets, spindles, and springs. See part numbers and schematics guide for a full breakdown of parts and...

Internal valve plate for Allredi 2-Hole Junior Mixing Valve Valve Plate for Allredi 2-Hole Junior Mixing Valve Documents: Allredi 2-Hole Junior Mixing Valve - Part Numbers & Schematics Guide - 106M431 Allredi 2-Hole Junior Mixing Valve -...

Service kit for Allredi 2-Hole Junior Mixing Valve. Complete service kit (10L336A) with washers, gaskets, spindles, and springs. Does not include valve plate. See part numbers and schematics guide for a full breakdown of parts and quantities included...

3/8" Lock Washer Galvanized

Pop-up valve with male internal sleeve. Orange rubber body, seats with Pop-Up Valve Seat (1006040) Pop-Up Valve, Internal Orange Rubber Body

Hose Clamp - 3/4" ID Abrasive Blasting Hose  

Valve Cover Gasket for 2 and 4 Hole Jr.

The GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the blast pot. The 1-1/2" GateKeeper Air Valve is a component part of the pressure-hold 130P and 130E Remote Control Systems. 1-1/2" GateKeeper Air...

Service kit for Allredi 1-1/2" Inlet Valve. Includes o-rings, inner spring, bottom cap gasket, outer spring, and two plug washers. Service Kit for Allredi 1-1/2" Inlet Valve Documents: Allredi 125P Remote Control System - Part Numbers &...

A blast pot exhaust muffler reduces the noise and traps particles generated during the depressurization process of a blast pot. Blast Pot Exhaust Muffler Aluminum body Steel Mesh Screen HDPE Element Galvanized pipe fittings Documents: Allredi...

Handle Grip for Blastmaster® 153 Remote Control Valve

1/2" ID x 10 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

Filler Plug O-Ring for .15 - 6.0 Cu. Ft. Abrasive Blasting Pots  

This repair kit fits both the 1-1/4" & 1-1/2" GateKeeper Air Valves. This kit includes the nuts, gaskets and o-rings, and diaphragm. See part numbers and schmatics guide for a full list of part numbers included. Repair Kit for 1-1/4" & 1-1/2"...

Venturi Nozzle Conversion Kit  

The 1-1/2” inlet valve allows a larger volume of air to flow into the blasting system. The Allredi 1-1/2" Inlet Valve is a component part in the 125P and 125E Remote Control Systems. 1-1/2" Inlet Valve Documents: Allredi 125P Remote Control...

Valve Spindle for Blastmaster® 153 Remote Control Valve  

Star Washer for Blastmaster® 153 Remote Control Valve

Pop-up valve with female external sleeve. Black rubber body, seats with Pop-Up Valve Seat (1006050). Pop-Up Valve, External Black Rubber Body    

Hose Clamp - 1/2" ID Abrasive Blasting Hose  

Control Link for 1.0/1.5 Cu. Ft. Machine

1-1/2" blast pot pusher line assembly with two 1-1/2" female swivels, two 1-1/2" T-bolt hose clamps, and 3' x 1-1/2" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/2" pipe string. 1-1/2" Pusher Line Assembly Two 1-1/2" Female Swivels...

Cover Bolt with Pin for 2- and 4-Hole Jr.  

Jr./Sr. Spindle Bolt

The 1” Outlet Valve allows the blast pot to depressurize when the remote control switch is released. This Outlet Valve is a component part in the 125P and 125E Remote Control Systems. 1" Outlet Valve Documents: Allredi 125P Remote Control...