Dixon
8" Buna Nitrile Cam & Groove Gasket
- SKU:
- NLDIX800-G-BU
- Availability:
- Limited quantity available.
- Weight:
- 0.30 LBS
Description
8" Buna Nitrile Cam & Groove Gasket
8" Buna Nitrile Cam & Groove Gasket provides the replaceable sealing element used inside compatible Dixon 8" cam and groove couplings.
Manufactured from black nitrile rubber / Buna-N, the Dixon 800-G-BU seats within the coupling gasket recess to help create the seal between mating cam and groove components.
Product Highlights
Dixon 800-G-BU is an 8" black nitrile rubber gasket designed for compatible cam and groove coupling assemblies.
The replaceable Buna-N sealing ring fits within the coupler gasket recess to support a secure mating connection.
Technical Specifications
Cam & Groove Gasket Configuration
The gasket installs inside the recessed sealing area of a compatible 8" cam and groove coupler.
The nitrile ring forms the sealing interface between the coupler and its compatible mating adapter when the cam arms are secured.
Cam & Groove Gasket Design
The 800-G-BU is the replaceable sealing component used inside compatible 8" cam and groove couplers. Replacing the gasket allows the sealing surface to be renewed without automatically replacing the complete metal coupling body.
Inspect the gasket whenever the coupling is serviced or leakage is observed. A gasket that is cut, flattened, hardened, swollen, or otherwise damaged should be replaced before the assembly returns to service.
Dixon identifies the 800-G-BU as a nitrile rubber gasket and lists the color as black. Buna-N is the common material designation associated with this standard cam and groove gasket option.
Seal material should be checked against the transferred media and service conditions before installation. Another gasket material should not be substituted solely because the dimensions appear similar.
Dixon assigns part number 800-G-BU specifically to the 8" size in its cam and groove gasket family. Smaller coupling sizes use different gasket part numbers even though the basic ring-style construction is similar.
Confirm both the 8" coupling size and 800-G-BU part number before ordering. Correct sizing helps the gasket sit evenly in the recess and maintain the intended sealing position when the connection is assembled.
The coupler recess should be clean before the replacement gasket is installed. Remove debris, old gasket residue, and contamination that could prevent the new ring from lying flat against its seating surface.
After installation, check that the gasket remains evenly seated and that the mating adapter enters the coupler without displacing the seal. Inspect the complete cam and groove connection before putting the assembly back into service.
Installation & Selection Considerations
Confirm Dixon part number 800-G-BU.
Verify the 8" coupling size.
Confirm nitrile material compatibility.
Clean the gasket recess before use.
Inspect the seal after installation.

Our product specialists can help review 800-G-BU compatibility, 8" coupling size, Buna-N material requirements, existing cam and groove components, and replacement gasket selection before you order.
Frequently Asked Questions
What size is the Dixon 800-G-BU gasket?
Dixon lists the 800-G-BU as an 8" (200 mm) cam and groove gasket.
What material is the gasket made from?
The 800-G-BU is manufactured from nitrile rubber, commonly referred to as Buna-N.
What color is the 800-G-BU?
Dixon lists the standard 800-G-BU nitrile gasket as black.
Where does the gasket install?
It installs inside the gasket recess of a compatible 8" cam and groove coupler.
Can the gasket be replaced separately from the coupling?
Yes. Dixon lists the 800-G-BU as an individual replacement gasket for compatible cam and groove couplers.
What should be checked during replacement?
Inspect the gasket recess, mating adapter, cam arms, coupling body, and new gasket for contamination, wear, or damage before reassembly.
Important Ordering & Installation Notes
- Confirm Dixon part number 800-G-BU.
- Verify the 8" nominal size.
- Confirm nitrile rubber requirements.
- Check cam & groove compatibility.
- Inspect the new gasket before use.
- Clean the gasket recess before installation.
- Seat the gasket evenly in the coupler.
- Inspect the mating adapter surface.
- Replace damaged coupling components.
- Verify the connection before service.