Dixon
4" Cam & Groove Black Nitrile Buna-N Gasket
- SKU:
- NLDIX400-G-BU
- Availability:
- Limited quantity available.
- Weight:
- 0.10 LBS
Description
4" Cam & Groove Black Nitrile Buna-N Gasket
4" Cam & Groove Black Nitrile Buna-N Gasket provides a replacement sealing component for compatible 4" cam and groove coupler assemblies.
Manufactured from black nitrile rubber, the Dixon 400-G-BU is sized for 4" cam and groove connections. A single blue stripe provides the Dixon color code for this gasket configuration.
Product Highlights
Black nitrile rubber gasket designed as a replacement seal for compatible 4" cam and groove couplers.
The 400-G-BU provides a 4" sealing profile with a single blue stripe for material identification.
Technical Specifications
Cam & Groove Gasket Configuration
The gasket installs inside a compatible 4" female cam and groove coupler to provide the sealing surface at the connection.
The gasket seals against the mating male adapter as the cam arms are closed and the connected components are properly engaged.
Black Nitrile Cam & Groove Gasket Design
The Dixon 400-G-BU is specifically sized for compatible 4" cam and groove coupler assemblies. It serves as the replaceable sealing component positioned inside the female coupler and seals against the mating male adapter.
Confirm the nominal coupling size before ordering because the gasket must match the intended coupler configuration. Proper sizing helps maintain consistent gasket contact around the mating adapter when the cam arms are fully engaged.
The 400-G-BU is manufactured from black nitrile rubber for use as a standard replacement gasket in compatible cam and groove connections. Dixon identifies this gasket configuration with a single blue stripe for material recognition.
Gasket material should always be selected according to the transferred media and operating conditions of the complete system. Confirm nitrile compatibility before installation rather than selecting the gasket by nominal size alone.
The gasket provides the sealing interface between a compatible female cam and groove coupler and its mating male adapter. Proper gasket condition is important because the seal is compressed as the cam arms draw the connected components together.
Inspect the gasket for cuts, flattening, hardening, swelling, contamination, or other visible deterioration before assembly. Replace a worn or damaged gasket instead of returning the coupling to service with a compromised sealing component.
Correct gasket selection should account for nominal coupling size, elastomer material, transferred media, temperature, and overall operating conditions. Dixon notes that the force required to close cam handles can vary depending on the gasket selected.
Inspect the gasket recess and mating adapter surface before installing the replacement seal. Proper seating, clean mating surfaces, and correct cam engagement help the gasket maintain uniform contact throughout the assembled connection.
Installation & Selection Considerations
Confirm the 4" gasket size.
Verify nitrile rubber material.
Inspect the gasket recess.
Check the mating adapter.
Confirm media compatibility.

Our product specialists can help review gasket size, elastomer material, cam and groove compatibility, transferred media, and replacement requirements before you order.
Frequently Asked Questions
What is the Dixon 400-G-BU?
The 400-G-BU is a 4" black nitrile rubber replacement gasket for compatible cam and groove coupler assemblies.
What material is the 400-G-BU made from?
Dixon specifies nitrile rubber for the 400-G-BU gasket.
What size is the 400-G-BU?
The gasket has a nominal cam and groove size of 4", which Dixon also lists as 100 mm.
What color is the 400-G-BU?
The gasket is black and Dixon identifies its color code as one blue stripe.
Where is the gasket installed?
It installs in a compatible female cam and groove coupler and seals against the mating male adapter.
When should the gasket be replaced?
Replace the gasket when inspection shows cuts, flattening, hardening, swelling, contamination, or other deterioration that could affect sealing.
Important Ordering & Installation Notes
- Verify Dixon part number 400-G-BU.
- Confirm the 4" gasket size.
- Verify black nitrile construction.
- Confirm the single blue stripe.
- Check media compatibility.
- Inspect the gasket before installation.
- Clean the gasket seating surface.
- Check the mating adapter for damage.
- Replace worn or damaged gaskets.
- Verify the complete connection before service.