Dixon
5" Galvanized Band Clamp
- SKU:
- NLDIXK20
- Availability:
- Limited quantity available.
- Weight:
- 0.85 LBS
Description
5" Galvanized Band Clamp
5" Galvanized Band Clamp is a Dixon K-Series universal preformed clamp designed for securing compatible hose and coupling assemblies.
The K20 is manufactured from galvanized steel with a 5" clamp ID, 5/8" band width, and .031" band thickness. The preformed clamp can be center punched or rolled over using compatible installation tooling.
Product Highlights
Galvanized steel preformed clamp designed to secure compatible hose and coupling assemblies during installation.
The 5" K20 configuration provides a 5/8" band with .031" thickness for center-punch or roll-over tooling.
Technical Specifications
Band Clamp Installation Configuration
The K20 provides a preformed galvanized steel band with a 5" inside diameter for securing a properly matched hose and coupling assembly.
The preformed band can be center punched or rolled over using compatible tooling appropriate for its 5/8" band width.
K-Series Universal Preformed Band Clamp Design
The Dixon K20 is supplied as a preformed band clamp with a specified 5" inside diameter. Its formed configuration provides a ready-sized clamp for compatible hose and coupling assemblies.
Confirm the required clamp diameter before installation to ensure the K20 matches the completed assembly. Clamp selection should be based on the actual assembly dimensions and attachment requirements.
The K20 is manufactured from galvanized steel and uses a 5/8" wide band with a .031" thickness. These dimensions should be confirmed when selecting installation tooling and replacement clamps.
Inspect the band and buckle area before installation for deformation, corrosion, or other visible damage. Do not install a clamp that has been damaged or altered.
Dixon specifies that K-Series universal preformed band clamps can be center punched or rolled over. The installation method should correspond with the compatible tool selected for the assembly.
Verify that the selected installation tool supports the K20's 5/8" band width and clamp configuration before beginning assembly.
The K20's 5" dimension refers to the clamp inside diameter rather than automatically identifying a nominal hose size. The complete hose and coupling assembly should be evaluated when selecting the clamp.
Verify clamp ID, material, band dimensions, and installation method before ordering. Proper component selection helps provide the intended fit and installation for the finished hose assembly.
Installation & Selection Considerations
Confirm the 5" clamp ID.
Verify the 5/8" band width.
Confirm .031" band thickness.
Match the completed hose assembly.
Use compatible installation tooling.

Our product specialists can help review clamp ID, band dimensions, hose and coupling requirements, and compatible installation tooling before you order.
Frequently Asked Questions
What is the Dixon K20?
The K20 is a Dixon K-Series universal preformed band clamp manufactured from galvanized steel.
What is the clamp ID of the K20?
The K20 has a 5" clamp inside diameter.
What is the K20 band width?
The Dixon K20 uses a 5/8" wide galvanized steel band.
What is the band thickness?
The K20 uses a .031" thick galvanized steel band.
How can the K20 be installed?
The K20 can be center punched or rolled over using compatible installation tooling.
What should be confirmed before installation?
Verify clamp ID, hose assembly dimensions, band width, and installation tooling before installing the K20.
Important Ordering & Installation Notes
- Verify Dixon part number K20.
- Confirm the 5" clamp ID.
- Verify the 5/8" band width.
- Confirm .031" band thickness.
- Verify galvanized steel construction.
- Inspect the clamp before installation.
- Confirm hose and coupling compatibility.
- Use compatible installation tooling.
- Follow the selected tool instructions.
- Verify the completed assembly before service.