Charman Inc.
5/8" OD Yellow Coated Gas Connector - 1/2" FIP x 1/2" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
5/8" OD Yellow Coated Gas Connector - 1/2" FIP x 1/2" FIP
Charman Inc 5/8" OD Yellow Coated Gas Connectors provide a flexible connection for compatible gas-fired appliances and equipment. This configuration features 1/2" FIP connections on both ends and is available in lengths from 12" through 72" to accommodate different installation layouts.
The flexible corrugated connector construction helps bridge fixed gas piping and compatible equipment where rigid-pipe alignment may be impractical. Equal female-threaded ends provide a straightforward connection where both mating points use compatible 1/2" male pipe threads.
Product Highlights
- Charman Inc yellow coated gas connector
- 5/8" outside diameter
- 1/2" FIP x 1/2" FIP connection configuration
- Female threaded connections on both ends
- Flexible corrugated connector construction
- Yellow exterior coating
- Available in lengths from 12" through 72"
- Multiple lengths for different installation layouts
- Designed for compatible gas appliance and equipment connections
- Flexible design helps accommodate connection alignment and routing
Technical Specifications
| Product Type | Yellow Coated Gas Connector |
|---|---|
| Brand | Charman Inc |
| Product Family | 800-58-A6 |
| Connector OD | 5/8" |
| Connection 1 | 1/2" FIP |
| Connection 2 | 1/2" FIP |
| Connection Configuration | 1/2" Female Iron Pipe x 1/2" Female Iron Pipe |
| Construction | Flexible Corrugated Gas Connector |
| Exterior | Yellow Coated |
| Available Lengths | 12", 18", 24", 30", 36", 48", 60" and 72" |
| Primary Application | Flexible Gas Appliance and Equipment Connections |
Understanding the Connection Configuration
This connector has a 1/2" FIP connection on both ends. FIP identifies a female threaded pipe connection, so each end is intended to connect to a compatible 1/2" male threaded connection.
Because both ends use the same nominal pipe size and thread style, this connector is suited for installations requiring female 1/2" threaded connections at both ends of the flexible connector.
Why Choose a Yellow Coated Gas Connector?
Flexible Installation
- Accommodates practical routing between fixed connection points
- Useful where rigid piping alignment is difficult
- Provides flexibility between gas piping and connected equipment
- Multiple lengths accommodate different installation layouts
- Helps simplify final appliance and equipment connections
Equal Female Connections
- 1/2" FIP connection on both ends
- Both threaded ends use the same nominal pipe size
- Designed for compatible male threaded connections
- Straightforward female x female configuration
- Available across multiple connector lengths
Choosing the Correct Length
Measure the distance and planned routing between the gas supply and the appliance or equipment connection before selecting a connector. Choose a length that provides adequate routing without requiring the connector to be stretched or placed under unnecessary tension.
Available lengths range from 12" through 72", allowing the connector to be matched more closely to the installation. Avoid selecting excessive length simply to create additional slack.
Common Applications
Gas-Fired Equipment
- Compatible gas appliances
- Commercial cooking equipment
- Heating equipment
- Mechanical equipment
- Other compatible gas-fired equipment
Installation & Replacement
- New equipment installations
- Replacement gas connector applications
- Maintenance projects
- Equipment connection updates
- Applications requiring female threaded connections on both ends
Available Connector Lengths
The 800-58-A6 connector family is available in eight lengths while maintaining the same 5/8" OD and 1/2" FIP x 1/2" FIP connection configuration.
- 12"
- 18"
- 24"
- 30"
- 36"
- 48"
- 60"
- 72"
Female x Female Connection Applications
The 1/2" FIP x 1/2" FIP configuration is designed for installations where both mating points provide compatible 1/2" male threaded connections. Both ends use the same nominal pipe size, so no reduction or increase in threaded connection size occurs through the connector.
Confirm the connection style and nominal pipe size at both ends of the installation before ordering.
Ask Willy: Need Gas Connector Help?
Review the Yellow Coated Gas Connector specification sheet for product information, or use the complete Charman Inc connector catalog to compare available connector diameters, connection configurations, and lengths before ordering.
Installation & Selection Guidance
- Confirm that a 5/8" OD gas connector is appropriate for the intended installation.
- Confirm that both required connections are 1/2" FIP.
- Verify that both mating components provide compatible 1/2" male threaded connections.
- Select a connector length appropriate for the actual installation distance and routing.
- Do not stretch the connector to reach between connection points.
- Avoid sharp bends, kinks, crushing, twisting, or other connector damage.
- Route the connector so it is protected from physical damage.
- Inspect the connector, coating, and end fittings before installation.
- Avoid contact with sharp edges or surfaces that could damage the connector or coating.
- Use connection and sealing practices appropriate for the gas piping system and applicable requirements.
- Leak-test completed gas connections using an appropriate method before placing equipment into service.
- Follow applicable fuel-gas codes, local requirements, equipment instructions, and connector documentation.
- Installation should be completed by qualified personnel familiar with gas piping systems.
Product Selection Considerations
Connection Type
This family is specifically configured with 1/2" FIP connections at both ends. Confirm that two female threaded connector ends match the required installation before ordering.
Connector Length
Select from 12", 18", 24", 30", 36", 48", 60", or 72" according to the required installation distance and routing. Choose a length that permits proper installation without stretching or excessive slack.
Need Help Selecting a Gas Connector?
Our PVF specialists can help review your connector diameter, FIP connection requirements, required length, equipment connection, and installation conditions before you order.
Frequently Asked Questions
What size is this gas connector?
This connector family has a 5/8" outside diameter with 1/2" nominal female threaded connections on both ends.
What connections does this connector have?
It has a 1/2" FIP female threaded connection on each end.
What lengths are available?
This listing includes 12", 18", 24", 30", 36", 48", 60", and 72" lengths.
What does FIP mean?
FIP identifies a female threaded pipe connection. Both ends of this connector use 1/2" FIP connections.
Are both threaded ends the same size?
Yes. Both ends are 1/2" FIP.
What mating connection is required?
Each 1/2" FIP connector end requires a compatible 1/2" male threaded connection.
How do I choose the correct connector length?
Measure the required connection distance and consider the intended routing. Select a length that allows proper installation without stretching, kinking, twisting, or placing unnecessary tension on the connector.
Can the connector be sharply bent?
The connector should be routed without sharp bends, kinks, twisting, crushing, or other conditions that could damage it.
Should gas connections be leak-tested after installation?
Yes. Completed gas connections should be leak-tested using an appropriate method before the connected equipment is placed into service.
Where can I find other gas connector configurations?
Use the Charman Inc Yellow Coated Gas Connector catalog linked in the Willy section to compare other connector diameters, connection styles, and available lengths.
Important Ordering Notes
- This listing is for Charman Inc 5/8" OD yellow coated gas connectors.
- Connection configuration is 1/2" FIP x 1/2" FIP.
- Both connector ends are female threaded connections.
- Both threaded connections are 1/2" nominal size.
- Select the required connector length from the available options.
- Available lengths are 12", 18", 24", 30", 36", 48", 60", and 72".
- Confirm both mating connections are compatible with 1/2" female pipe threads before ordering.
- Confirm connector routing and required installation length before ordering.
- Do not install a connector that is kinked, twisted, crushed, or otherwise damaged.
- Review the linked Charman Inc specification sheet and connector catalog for additional product information.
- Installation should comply with applicable fuel-gas codes, equipment requirements, and local regulations.
- Gas connections should be installed and tested by qualified personnel.
