Service Metal
304 Stainless Steel 150# Socket Weld 90° Elbow
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
304 Stainless Steel 150# Socket Weld 90° Elbow
304 Stainless Steel 150# Socket Weld 90° Elbows provide a welded fitting for making a 90-degree change in piping direction. Manufactured from 304 stainless steel, these elbows feature socket-weld connections and an SP114 pattern for industrial, commercial, mechanical, and process piping applications.
This listing includes nominal pipe sizes from 1/2" through 2". Select the required size for your piping system and confirm material, pressure, and connection requirements before installation.
Product Highlights
- 90-degree socket-weld pipe elbow
- 304 stainless steel construction
- 150 lb pressure class
- Socket-weld connections
- SP114 pattern
- Changes piping direction by 90 degrees
- Corrosion-resistant stainless steel construction
- Designed for welded piping assemblies
- Available in sizes from 1/2" through 2"
- Manufactured by Service Metal
Technical Specifications
| Manufacturer | Service Metal |
|---|---|
| Product Type | 90° Elbow |
| Material | 304 Stainless Steel |
| Pressure Class | 150 lb |
| Connection Type | Socket Weld |
| Pattern | SP114 Pattern |
| Angle | 90° |
| Available Sizes | 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" |
| Series | SSPSW49 |
304 Stainless Steel Construction
304 stainless steel provides corrosion resistance and durability for a wide range of industrial, commercial, mechanical, and process piping applications where this stainless steel grade is compatible with the service conditions.
Material suitability should be confirmed based on the conveyed media, operating temperature, pressure, environment, and applicable piping specification.
Socket Weld Connection
Welded Installation
- Socket-weld connection at both ends
- Pipe inserts into the fitting socket before welding
- Creates a permanent welded piping connection
- Does not rely on threaded joints
- Suitable for compatible stainless steel piping systems
90° Direction Change
- Changes piping direction by 90 degrees
- Creates a right-angle turn in the piping system
- Useful for routing pipe around equipment and obstructions
- Suitable for horizontal and vertical piping layouts
- Provides a compact directional fitting for welded piping assemblies
Available Sizes
- 1/2"
- 3/4"
- 1"
- 1-1/4"
- 1-1/2"
- 2"
Performance Features
150 lb Class
These elbows are identified as 150 lb class stainless steel socket-weld fittings.
Socket Weld
The socket-weld connection provides a welded joint for compatible stainless steel piping systems.
304 Stainless Steel
All variants in this listing are manufactured from 304 stainless steel.
Common Applications
Industrial & Process Piping
- Industrial piping systems
- Process piping
- Utility piping
- Equipment connections
- Fabricated piping assemblies
- Maintenance and replacement work
Commercial & Mechanical Piping
- Commercial mechanical systems
- Stainless steel piping assemblies
- Equipment rooms
- Welded piping systems
- Right-angle piping changes
- Applications requiring stainless steel fittings
Selecting the Correct Elbow
Select the elbow according to the nominal pipe size required by the piping system. All variants in this listing are 304 stainless steel and use socket-weld connections.
Confirm that a 90-degree elbow and socket-weld connection are appropriate for the piping layout before ordering. If a 45-degree directional change, threaded connection, or another stainless steel grade is required, select the corresponding fitting type instead.
Ask Willy: Need Pipe Size Help?
Use our common pipe diameters and wall thickness chart to confirm sizing before ordering 150# stainless steel socket-weld 90° elbows. You can also review the product specification sheet and Certificate of Conformance below.
Product Documentation
Product Specification Sheet
Review the specification sheet for dimensional and product-specific information on the 150# stainless steel socket-weld 90° elbow.
Pipe Size Chart
Use the common pipe diameters and wall thickness chart to help confirm compatible pipe sizing before ordering.
Certificate of Conformance
Certificate of Conformance documentation is available through the linked PDF.
Installation & Selection Guidance
- Confirm the required nominal pipe size before ordering.
- Confirm that 304 stainless steel is compatible with the intended service.
- Verify that socket-weld connections are required.
- Confirm that a 90-degree directional change is appropriate for the piping layout.
- Prepare pipe and fitting surfaces according to applicable welding procedures.
- Maintain appropriate insertion clearance when assembling socket-weld joints.
- Use welding procedures appropriate for 304 stainless steel piping components.
- Confirm pressure and temperature requirements for the complete piping system.
- Inspect completed welds according to applicable project requirements.
- Installation should be performed by qualified personnel.
- Follow applicable piping codes, specifications, and welding procedures.
Need Help Selecting Stainless Steel Fittings?
Our industrial PVF specialists can help review your pipe size, connection requirements, stainless steel material, and application before you order.
Frequently Asked Questions
What is this fitting used for?
This elbow is used to change the direction of a compatible socket-weld piping system by 90 degrees.
What material is this elbow made from?
All variants in this listing are manufactured from 304 stainless steel.
What connection type does this elbow use?
These elbows use socket-weld connections at both ends.
What pressure class are these fittings?
These stainless steel socket-weld elbows are identified as 150 lb class fittings.
What sizes are available?
This listing includes 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" nominal pipe sizes.
Is this a 45-degree elbow?
No. This fitting changes piping direction by 90 degrees. A separate 45-degree socket-weld elbow should be selected when a 45-degree directional change is required.
Is this fitting threaded?
No. This listing is for socket-weld elbows rather than NPT threaded elbows.
Does this listing include 316 stainless steel?
No. The supplied SSPSW49 variants in this listing are 304 stainless steel.
How do I select the correct size?
Select the nominal pipe size that matches the compatible socket-weld piping used in the system.
Important Ordering Notes
- This listing is for 304 stainless steel socket-weld 90° elbows.
- All variants are SSPSW49-series 304 stainless steel fittings.
- Fittings are 150 lb class.
- Connections are socket weld.
- Product is identified as an SP114 pattern fitting.
- Available nominal sizes in this listing are 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2".
- This listing does not include threaded NPT elbows.
- This listing does not include 316 stainless steel variants.
- Select the correct nominal pipe size before ordering.
- Verify material compatibility with the intended application.
- Confirm system pressure, temperature, welding, and installation requirements.
- Installation should be performed by qualified personnel.
