150# Cast Stainless Socket Weld 90 Elbow 304

Product Highlights

• ASC cast stainless steel fitting
• SKU S3714E
• 304 stainless steel
• 150# configuration
• 90° elbow
• Socket-weld connection style
• Cast stainless construction
• 304 stainless castings conform to ASTM A351 ACI Grade CF8
• CMTRs available upon request
• Designed for compatible welded piping systems

A socket weld 90-degree elbow changes the direction of a piping run by 90 degrees while using socket-style weld connections at both ends.

The adjoining pipe is inserted into the fitting socket before welding, creating a permanent welded piping connection.

Confirm that the piping layout specifically requires a 90° socket-weld elbow before fabrication or installation.

The current GetPipe.com product listing identifies this 150# Cast Stainless Socket Weld 90 Elbow 304 under SKU S3714E.

The product is part of ASC's cast stainless socket-weld fitting family and is the 304 stainless version of the 90° elbow configuration.

No size, dimensional, part-number, packing, or weight tables have been added to this page.

This fitting uses cast 304 stainless steel construction.

ASC/GetPipe identifies the 304 stainless castings as conforming to ASTM A351 ACI Grade CF8. :contentReference[oaicite:2]{index=2}

The current product information also states that CMTRs are available upon request and references independent verification of applicable chemical and mechanical properties. :contentReference[oaicite:3]{index=3}

This product is the 304 stainless steel version of the ASC cast socket-weld 90° elbow family.

The supplied product information identifies the 304 casting grade as ASTM A351 ACI Grade CF8.

Confirm compatibility between the fitting material, adjoining pipe, process media, welding procedure, and overall system requirements before installation.

The fitting uses socket-weld connections rather than threaded or butt-weld ends.

Pipe is inserted into the fitting socket before the joint is welded, producing a permanent connection within the piping assembly.

Proper pipe preparation, insertion depth, alignment, and welding procedures should be followed for the intended piping system.

The supplied SCI Stainless Weld Fittings Catalog is included as an additional stainless fitting reference.

That catalog covers SCI stainless butt-weld fitting families and states that stainless weld fittings conform to ASTM A403 Grade 304/304L & 316/316L, ASTM A960, and MSS SP-43, with dimensions conforming to ASME B16.9 except wall thickness and MSS SP-43. :contentReference[oaicite:4]{index=4}

Because this product is a cast socket-weld elbow, use the supplied ASC Socket Weld product sheet as the more product-specific document for this fitting.

The supplied GetPipe.com Common Diameters and Wall Thicknesses PDF is included as a general adjoining-pipe reference.

Use it when checking nominal pipe size, outside diameter, and schedule-related wall-thickness information for compatible piping.

The pipe chart should not be interpreted as providing the fitting's socket depth, center-to-end dimensions, overall dimensions, or fitting weight.

The 150# Cast Stainless Socket Weld 90 Elbow 304 is intended for compatible piping systems requiring a 90-degree directional change with welded socket connections.

Final suitability should be confirmed against stainless steel material requirements, connection style, adjoining pipe, welding requirements, operating conditions, and process media.

• Confirm that the installation requires a 150#, 304 stainless steel, 90° socket-weld elbow.
• Verify compatibility between the fitting sockets and the adjoining pipe.
• Confirm 304 stainless steel is suitable for the intended service and process media.
• Use appropriate pipe preparation, insertion, alignment, and welding procedures.
• Review the supplied ASC Socket Weld sheet as the product-specific reference, with the SCI catalog and pipe chart used only as supporting references.