Dixon
2" Buna-N Hose End Washer Gasket
- SKU:
- NLDIXH5075-BU
- Availability:
- Limited quantity available.
- Weight:
- 0.03 LBS
Description
2" Buna-N Hose End Washer Gasket
2" Buna-N Hose End Washer Gasket provides the replaceable sealing surface inside compatible female Holedall® hose couplings.
Replacing the washer allows an otherwise serviceable coupling body to remain in use while restoring the sealing interface during routine hose-end maintenance.
Product Highlights
Dixon H5075-BU replacement washer for compatible 2" female Holedall® coupling assemblies.
Buna-N construction provides the sealing element inside the female hose-end connection.
Technical Specifications
Female Coupling Washer Configuration
The washer installs inside the compatible female coupling and forms the sealing interface at the connected hose-end fitting.
The nitrile washer can be replaced independently when the metal coupling body and surrounding components remain suitable for continued service.
Holedall® Replacement Washer Design
The H5075-BU serves as the replaceable sealing washer inside compatible 2" female Holedall® couplings. It allows the sealing component to be renewed without automatically replacing the complete hose-end coupling assembly.
This can simplify maintenance when the existing metal fitting remains serviceable but the washer has worn, hardened, or become damaged. Inspect the coupling body, washer seat, and mating connection whenever the seal is replaced.
Dixon identifies H5075-BU as the nitrile rubber replacement washer for the 2" size in its Holedall® replacement-washer family. Buna-N provides the elastomeric sealing surface used inside the female coupling connection.
The gasket material should still be reviewed against the actual transferred media and operating environment before installation. Do not substitute another elastomer solely because a different washer appears similar in shape or dimensions.
Dixon assigns H5075-BU specifically to the 2" position in its female replacement washer table. The surrounding Holedall® sizes use different washer part numbers even though the components may look nearly identical.
Verify both the coupling size and H5075-BU part number before ordering. Correct sizing helps the washer seat properly and maintain the intended sealing interface when the coupling is assembled.
Before installing the replacement washer, clean the gasket seat and inspect the female coupling for thread damage, corrosion, contamination, or deformation. The new washer should lie evenly in the coupling without twisting, folding, or pinching.
After reassembly, confirm that the mating fitting engages correctly and that the gasket remains properly seated. Couplings with damaged sealing surfaces or structural defects should be repaired or replaced before the hose assembly returns to service.
Installation & Selection Considerations
Confirm part number H5075-BU.
Verify the 2" coupling size.
Confirm Buna-N compatibility.
Clean the washer seating area.
Inspect the coupling before reuse.

Our product specialists can help review H5075-BU compatibility, coupling size, Buna-N requirements, female hose-end configuration, and existing Holedall® components before you order.
Frequently Asked Questions
What is the Dixon H5075-BU?
H5075-BU is the 2" Buna-N replacement washer for compatible female internally expanded Holedall® couplings.
What material is the washer made from?
Dixon identifies H5075-BU as nitrile rubber, commonly referred to as Buna-N.
Where does the washer install?
It installs inside the compatible female hose-end coupling and provides the sealing surface at the connection.
Is H5075-BU specific to the 2" size?
Yes. Dixon assigns H5075-BU specifically to the 2" size in its female Holedall® replacement washer table.
Can the washer be replaced separately?
Yes. Dixon lists H5075-BU as an individual replacement component for compatible female Holedall® couplings.
What should be checked during replacement?
Inspect the washer seat, threads, mating surfaces, coupling body, and new gasket for wear, damage, or contamination before reassembly.
Important Ordering & Installation Notes
- Confirm Dixon part number H5075-BU.
- Verify the 2" coupling size.
- Confirm Buna-N seal requirements.
- Check female coupling compatibility.
- Inspect the new washer before use.
- Clean the washer seating surface.
- Seat the gasket evenly in the coupling.
- Inspect threads and mating surfaces.
- Replace damaged coupling components.
- Check the connection before service.