Dixon
6" Buna-N Cam & Groove Gasket
- SKU:
- NLDIX600-G-BU
- Availability:
- Limited quantity available.
- Weight:
- 0.25 LBS
Description
6" Buna-N Cam & Groove Gasket
6" Buna-N Cam & Groove Gasket provides the replaceable sealing element used inside compatible 6" Dixon cam and groove couplers.
Manufactured from black nitrile rubber / Buna-N, the Dixon 600-G-BU seats within the coupler gasket recess to create the sealing interface between mating cam and groove components.
Product Highlights
Dixon 600-G-BU is a 6" Buna-N replacement gasket for compatible cam and groove couplers.
The nitrile rubber ring provides the sealing surface between properly matched coupling components.
Technical Specifications
Cam & Groove Gasket Configuration
The gasket fits into the recessed sealing area of a compatible 6" cam and groove coupler before the mating adapter is inserted.
The resilient nitrile ring compresses against the mating adapter face as the cam arms secure the connection.
Cam & Groove Gasket Design
The 600-G-BU is designed as the removable sealing component inside a compatible 6" cam and groove coupler. This allows the gasket to be renewed independently when the metal coupling body remains suitable for continued service.
Periodic gasket inspection is important because compression, repeated connection cycles, and service exposure can gradually change the condition of the elastomer. Replace the gasket when cuts, flattening, cracking, swelling, or other deterioration is visible.
Dixon's dimensional drawing identifies the 600-G-BU with a 6" inside diameter, approximately 7-1/16" outside diameter, and 1/4" thickness. These dimensions distinguish the standard gasket from other sizes and alternate gasket configurations.
Confirm the coupling size and gasket part number before replacement rather than relying only on visual appearance. Cam and groove gaskets can look similar across neighboring sizes while having different diameters and seating requirements.
Dixon specifies NBR, commonly referred to as nitrile rubber or Buna-N, for the 600-G-BU. The standard gasket is black, providing an easy visual distinction from several alternate Dixon gasket materials and color-coded options.
Material compatibility should be checked against the transferred media and service conditions before installation. Selecting a gasket should be based on chemical and application requirements rather than color or dimensions alone.
The gasket recess should be cleaned before a replacement ring is installed so dirt, old material, or product residue does not remain beneath the sealing surface. The new gasket should lie flat and evenly within the recess without twisting or folding.
After installation, inspect the mating adapter face and cam-arm operation before returning the assembly to service. Damage to the metal coupling or adapter can prevent a new gasket from sealing correctly even when the gasket itself is properly installed.
Installation & Selection Considerations
Confirm Dixon part number 600-G-BU.
Verify the 6" coupling size.
Confirm nitrile compatibility.
Clean the gasket recess.
Inspect mating sealing surfaces.

Our product specialists can help review 600-G-BU sizing, existing 6" cam and groove components, Buna-N material requirements, gasket dimensions, and replacement compatibility before you order.
Frequently Asked Questions
What size is the Dixon 600-G-BU gasket?
Dixon lists the 600-G-BU as a 6" (150 mm) cam and groove gasket.
What material is the 600-G-BU made from?
The gasket is manufactured from nitrile rubber / NBR, commonly referred to as Buna-N.
What are the gasket dimensions?
Dixon's dimensional drawing shows a 6" inside diameter, approximately 7-1/16" outside diameter, and 1/4" thickness.
Where does the gasket install?
It installs inside the gasket recess of a compatible 6" cam and groove coupler.
Can the gasket be replaced separately?
Yes. The 600-G-BU is a replacement gasket that can be changed without replacing an otherwise serviceable coupling body.
What should be inspected when replacing the gasket?
Check the gasket recess, mating adapter face, cam arms, coupling body, and new gasket for contamination, wear, or damage before reassembly.
Important Ordering & Installation Notes
- Confirm Dixon part number 600-G-BU.
- Verify the 6" nominal size.
- Confirm nitrile rubber compatibility.
- Check the gasket dimensions.
- Inspect the new gasket before use.
- Clean the gasket recess thoroughly.
- Seat the gasket flat and evenly.
- Inspect the mating adapter face.
- Check cam-arm operation before service.
- Replace damaged coupling components.