ASC
150 lb. Ductile Iron Flanged Reducing 90
- SKU:
- 38RE1
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
150 lb. Ductile Iron Flanged Reducing 90
ASC / SCI FIG 38RE1 150 lb. Ductile Iron Flanged Reducing 90° Elbow combines a 90-degree directional change with a transition between two different pipe sizes in one flanged fitting.
Manufactured from ductile iron conforming to ASTM A536, FIG 38RE1 is designed for compatible Class 150 flanged piping systems. Flanged fitting dimensions conform to ASME B16.42 and ANSI/AWWA C110/A21.10.
Product Highlights
- ASC / SCI FIG 38RE1
- Reducing 90° elbow design
- Two different flange sizes
- Ductile iron construction
- UL Listed through 12"
- Galvanizing available upon request
Technical Specifications
| Product Type | Flanged Reducing 90° Elbow |
|---|---|
| Brand | ASC / SCI |
| Figure | 38RE1 |
| Fitting Class | Class 150 |
| Configuration | Reducing 90° Elbow |
| Connection Type | Flanged x Flanged |
| Material | Ductile Iron |
| Material Standard | ASTM A536 |
| Flanged Fitting Standard | ASME B16.42 |
| Waterworks Standard | ANSI/AWWA C110/A21.10 |
| Listing | UL Listed Through 12" |
| Optional Finish | Galvanizing Available Upon Request |
Construction Details
FIG 38RE1 combines a 90-degree elbow and reducing transition in one fitting, allowing the piping direction and nominal pipe size to change at the same location.
The fitting is manufactured from ductile iron conforming to ASTM A536. Applicable flanged fitting dimensions conform to ASME B16.42 and ANSI/AWWA C110/A21.10.
Flanged connections at both ends provide serviceable bolted joints for compatible piping components. Galvanizing is available upon request when an alternate protective finish is required.
Design & Typical Applications
Reducing 90° Design
- 90-degree directional change
- Integral size transition
- Two flanged connections
- Ductile iron construction
- Serviceable bolted joints
Typical Applications
- Water distribution systems
- Industrial piping systems
- Mechanical piping systems
- Pump and valve piping
- Compatible utility piping
Installation & Selection Considerations
- Confirm both flange sizes.
- Verify the 90° orientation.
- Use compatible flange gaskets.
- Align mating flanges properly.
- Confirm system service requirements.
Use the supplied flange specifications and SCI Ductile Iron Flanged Fittings catalog to review flange information, FIG 38RE1 product details, reducing configurations, and selection information.
Need Help Selecting a Ductile Iron Flanged Reducing 90?
Need help confirming both flange sizes, reducing configuration, material requirements, gasket selection, or compatibility with your piping system? The GetPipe.com Team can help.
Frequently Asked Questions
What is the figure number for this reducing 90° elbow?
The ASC / SCI 150 lb. Ductile Iron Flanged Reducing 90° Elbow is FIG 38RE1.
What does a reducing 90° elbow do?
It changes piping direction by 90 degrees while transitioning between two different nominal pipe sizes.
What connections does FIG 38RE1 use?
FIG 38RE1 uses flanged connections at both ends for joining compatible flanged piping components.
How is a reducing 90° different from a standard 90° elbow?
A standard elbow typically connects the same nominal size at both ends, while a reducing elbow connects two different sizes.
What material is FIG 38RE1 made from?
FIG 38RE1 is manufactured from ductile iron conforming to ASTM A536.
What standards apply to this reducing elbow?
Applicable flanged fitting dimensions conform to ASME B16.42 and ANSI/AWWA C110/A21.10.
Can FIG 38RE1 be galvanized?
Yes. ASC / SCI identifies galvanizing as available upon request.
What should I confirm before ordering?
Confirm both flange sizes, 90-degree orientation, mating flange compatibility, gasket requirements, and intended system service.
Important Ordering & Installation Notes
- Confirm both flange sizes.
- Verify the reducing configuration.
- Use compatible flange gaskets.
- Support adjoining piping properly.
- Confirm intended system service.
