Spears
1-1/2" PVC DWV Female Trap Adapter w/ Plastic Nut and Washer (H x S)
- SKU:
- P104R-015
- Availability:
- Usually Ships Same Day
- Weight:
- 0.13 LBS
Description
1-1/2" PVC DWV Female Trap Adapter w/ Plastic Nut and Washer (H x S)
1-1/2" PVC DWV Female Trap Adapter w/ Plastic Nut and Washer (H x S) provides a transition between compatible PVC drain, waste, and vent piping and a 1-1/2-inch tubular trap or fixture-drain connection. The adapter includes a plastic nut and washer for completing the compatible slip-joint side of the drainage assembly.
The Hub x Slip (H x S) configuration combines a PVC hub connection with a serviceable tubular slip connection. The hub side integrates with compatible PVC DWV piping, while the included plastic nut and washer help secure and seal the compatible tubular connection.
Product Highlights
- PVC construction
- Plastic nut included
- Slip-joint washer included
- 1-1/2" nominal size
- Female trap adapter design
- Hub x slip configuration
- Provides a serviceable tubular drain connection
- Transitions compatible tubular components to PVC DWV piping
Technical Specifications
| Product Type | DWV Female Trap Adapter with Plastic Nut and Washer |
|---|---|
| Material | PVC |
| Nominal Size | 1-1/2" |
| System Type | Drain, Waste & Vent (DWV) |
| Configuration | Female Trap Adapter |
| Connection | Hub x Slip (H x S) |
| Hub End | Designed to Receive Compatible PVC DWV Pipe or Spigot |
| Slip Side | Designed for a Compatible Tubular Slip-Joint Connection |
| Included Components | Plastic Nut and Washer |
| PVC Joining Method | Solvent Weld at Hub Connection |
| Slip Joining Method | Mechanical Slip-Joint Assembly |
| Primary Function | Transition Between 1-1/2" PVC DWV Piping and Compatible Tubular Drain Components |
1-1/2" Female Trap Adapter
The 1-1/2" female trap adapter provides an interface between compatible PVC DWV piping and tubular trap or fixture-drain components. This allows the permanent PVC drainage piping to transition to a serviceable tubular connection within the fixture-drain assembly.
Confirm the 1-1/2-inch size and adjoining tubular components before installation so both sides of the adapter match the planned drainage arrangement.
Plastic Nut & Washer Included
The adapter includes a plastic nut and washer for the compatible slip-joint connection. The nut provides the mechanical tightening component while the washer works with the connection to create the seal around the compatible tubular drain component.
Verify that the nut, washer, and adjoining tubular component are properly positioned before tightening the slip-joint assembly.
Hub x Slip Connections
The H x S configuration combines a PVC hub connection with a tubular slip connection. The hub end is designed to receive compatible PVC DWV pipe or a properly sized spigot connection, while the slip side accommodates the compatible tubular drainage component.
The PVC hub side is solvent welded into the compatible DWV piping, while the tubular side uses the included plastic nut and washer to create a serviceable mechanical connection.
PVC DWV Applications
This female trap adapter is intended for compatible PVC drain, waste, and vent fixture-drain systems requiring a transition between 1-1/2-inch PVC piping and compatible tubular drainage components.
Before installation, verify the 1-1/2-inch size, H x S configuration, included plastic nut and washer, adjoining PVC piping, tubular component compatibility, available clearance, and overall fixture-drain layout.
Installation & Selection Considerations
- Confirm the 1-1/2" size.
- Verify the nut and washer.
- Confirm the H x S configuration.
- Check tubular drain component compatibility.
- Use proper PVC solvent-welding procedures.
Our PVC DWV fitting specialists can help review your 1-1/2" PVC and tubular drain sizes, H x S connection requirements, included plastic nut and washer, trap configuration, adjoining PVC piping, installation clearance, and overall fixture drainage layout before you order.
Frequently Asked Questions
What is a 1-1/2" PVC DWV Female Trap Adapter with Plastic Nut and Washer used for?
It provides a transition between compatible 1-1/2-inch PVC DWV piping and a tubular trap or fixture-drain connection.
What does H x S mean?
H x S identifies the Hub x Slip connection configuration used by this female trap adapter.
Are the plastic nut and washer included?
Yes. This product configuration includes both a plastic nut and washer for the compatible tubular slip-joint connection.
What connects to the hub end?
The hub end is designed to receive compatible PVC DWV pipe or a properly sized spigot connection.
What connects to the slip side?
The slip side is designed for a compatible tubular drainage component used within a trap or fixture-drain assembly.
What does the washer do?
The washer works with the plastic nut and compatible tubular component to create the seal at the mechanical slip-joint connection.
Can the tubular connection be serviced?
Yes. The nut-and-washer slip-joint arrangement can be loosened when adjustment, maintenance, or disassembly of the compatible tubular connection is required.
What should I confirm before ordering?
Confirm the 1-1/2-inch size, H x S configuration, included plastic nut and washer, tubular drain compatibility, adjoining PVC piping, and planned fixture-drain arrangement.
Important Ordering & Installation Notes
- Confirm the 1-1/2" size.
- Verify the nut and washer.
- Check the H x S configuration.
- Confirm tubular component compatibility.
- Follow applicable DWV installation requirements.
