Merit Brass
Stainless Steel Weld Tee
- SKU:
- SWST
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Stainless Steel Weld Tee
Stainless Steel Butt Weld Tees are designed to create 90° branch connections in stainless steel piping systems while maintaining a strong, permanent welded assembly. These fittings provide corrosion resistance, dimensional consistency, and long service life for commercial, industrial, and process piping applications.
Available in Schedule 10 and Schedule 40, these butt weld tees are manufactured from stainless steel raw material conforming to ASTM A312 and are produced and tested to recognized ASTM, ASME, ANSI, and MSS standards.
Product Highlights
- Stainless steel butt weld tee fitting
- Creates a 90° branch connection in compatible piping systems
- Available in Schedule 10 and Schedule 40
- Manufactured and tested in accordance with ASTM A403 and ASME SA403/SA403M
- Raw material conforms to ASTM A312
- Wall thicknesses conform to ANSI B16.9, ANSI B16.28, and MSS SP-43
- Precision-formed butt weld ends for accurate fit-up
- Corrosion-resistant stainless steel construction
- Suitable for permanent welded piping systems
- Designed for commercial, industrial, and process piping applications
90° Branch Connection
A butt weld tee creates a 90° branch from the main piping run, allowing flow to be divided, combined, or redirected within a compatible stainless steel piping system.
The welded configuration provides a permanent connection and eliminates threaded joints at the branch fitting.
Butt Weld Construction
Precision-formed butt weld ends support accurate fit-up with compatible stainless steel pipe before welding. Proper installation creates a continuous welded connection between the tee and adjoining pipe.
Confirm pipe size, wall thickness, material requirements, branch configuration, and welding procedure before fabrication or installation.
Technical Specifications
| Product Type | Butt Weld Tee |
|---|---|
| Material | Stainless Steel |
| Available Schedules | Schedule 10 & Schedule 40 |
| Connection Type | Butt Weld |
| Branch Angle | 90° |
| Raw Material Standard | ASTM A312 |
| Manufacturing / Testing Standard | ASTM A403 & ASME SA403/SA403M |
| Dimensional / Wall Thickness Standards | ANSI B16.9, ANSI B16.28 & MSS SP-43 |
| Primary Applications | Commercial, Industrial & Process Piping |
Schedule 10 vs. Schedule 40
Schedule 10
- Lighter wall option for compatible piping systems
- Useful where lower wall thickness is appropriate
- Manufactured and tested to applicable ASTM and ASME requirements
- Confirm mating pipe schedule before ordering
Schedule 40
- Heavier wall than Schedule 10
- Suitable where greater wall thickness is required
- Manufactured and tested to applicable ASTM and ASME requirements
- Confirm mating pipe schedule before welding
Standards & Construction
These stainless steel tees are manufactured from raw material conforming to ASTM A312. Manufacturing and testing are performed in accordance with ASTM A403 and ASME SA403/SA403M.
Applicable wall thicknesses and dimensions conform to ANSI B16.9, ANSI B16.28, and MSS SP-43 for compatibility with standard stainless steel piping systems.
Common Applications
Industrial & Process Piping
- Industrial piping systems
- Process piping
- Water treatment systems
- Mechanical equipment connections
- General stainless steel fabrication
Corrosion-Resistant Systems
- Food and beverage processing
- Chemical processing
- Commercial stainless steel piping
- Sanitary process systems
- Applications requiring welded branch connections
Important Ordering Notes
- Product type: Stainless Steel Butt Weld Tee.
- Creates a 90° branch connection.
- Available in Schedule 10 and Schedule 40.
- Raw material conforms to ASTM A312.
- Manufactured and tested to ASTM A403 and ASME SA403/SA403M.
- Applicable wall thicknesses and dimensions conform to ANSI B16.9, ANSI B16.28, and MSS SP-43.
- Confirm nominal pipe size and schedule before ordering.
- Verify branch requirements, mating pipe dimensions, and welding compatibility before installation.
- Use welding procedures appropriate for the stainless steel material and piping system.
- Confirm pressure, temperature, media, and corrosion-resistance requirements before installation.
- Refer to both Product Documents for dimensional and certification information.
Product Documents
Frequently Asked Questions
What is a butt weld tee?
A butt weld tee is a three-opening fitting used to create a 90° branch connection in a piping system.
What schedules are available?
The supplied product information lists Schedule 10 and Schedule 40 options.
What connection type is used?
These fittings use butt weld connections for permanent installation in compatible stainless steel piping systems.
What material standard applies to the raw material?
The raw stainless steel material conforms to ASTM A312.
What manufacturing and testing standards apply?
The fittings are manufactured and tested in accordance with ASTM A403 and ASME SA403/SA403M.
What dimensional standards apply?
Applicable wall thicknesses and dimensions conform to ANSI B16.9, ANSI B16.28, and MSS SP-43.
Can a butt weld tee be used to split flow?
Yes. A tee can be used to divide, combine, or redirect flow through a 90° branch, depending on the piping system design.
Can Schedule 10 and Schedule 40 tees be interchanged?
Do not assume interchangeability. Confirm actual wall thickness, mating pipe schedule, fitting dimensions, and welding requirements before installation.
Where can I find fitting dimensions?
Use the Stainless Steel Butt Weld Dimensions PDF in the Product Documents section above.
Is certification documentation available?
Yes. The Stainless Steel Certification Letter PDF is available in the Product Documents section above.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
