Specialty and Surplus

DeFelsko PosiTector UTG C Corrosion Probe Only PRBUTGC-C Specifications / Feature Probe only for DeFelsko PosiTector gage bodies Model: PRBUTGC / PRBUTGC-C Probe type: UTG C corrosion probe 5 MHz dual-element transducer Wear-resistant PEEK...

Defelsko PosiTest AT-A Automatic Adhesion Tester 20mm Kit The Defelsko PosiTest AT-A Automatic Adhesion Tester (Model ATA20A) is a professional-grade pull-off adhesion testing instrument designed to quantitatively evaluate the strength of coatings on...

DeMask OV/N95 Reusable Multi-Purpose Respirator 40-362 The DeMask OV/N95 Reusable Multi-Purpose Respirator (Part No. 40-362) is a half-mask respirator designed to deliver reliable protection and comfort in a wide range of industrial and hazardous...

Densyl Tape 6" X 33' Corrosion Protection Petrolatum Tape - Case of 12 Densyl Tape 6" x 33' is a high-performance petrolatum-based corrosion protection tape designed for industrial pipe and fitting protection. Each roll is fully impregnated with a...

DeVilbiss 5/8" Cleaning Brush Kit 10 Pack Spray Gun Maintenance Specifications / Feature: Brand: DeVilbiss Part Number: 42884-215-K10 Product Type: Spray Gun Cleaning Brush Kit Brush Diameter: 5/8" Bristle Material:...

DeVilbiss Compact Pressure Trans-Tech Spray Gun w/ P510 Air Cap The DeVilbiss Compact Pressure Trans-Tech Spray Gun (COM-PS510G-10-00) is a professional-grade conventional pressure spray gun engineered for high-quality...

Binks DeVilbiss Compact Spray Gun 507 With 20 Ounce Gravity Cup The Binks/DeVilbiss Compact 507 Gravity Feed 20 Ounce Cup Spray Gun is engineered to deliver exceptional atomization, consistent spray patterns, and professional-grade finishing results...

DeVilbiss Compact Trans Tech Spray Gun Model 510 With Cap The DeVilbiss Compact Trans Tech Spray Gun Model 510 With Cap delivers high-efficiency atomization with reduced overspray, making it ideal for automotive, industrial, and professional finishing...

DeVilbiss Compact Trans Tech Spray Gun Model 513 With Cap The DeVilbiss Compact Trans Tech 513 Spray Gun delivers high-efficiency atomization, consistent finish quality, and proven reliability for demanding professional finishing environments. Designed...

Devilbiss KK-4990 Agitator Conversion Kit Upgrade your spray-paint or compressor setup into a higher-efficiency, better-mixing system with the Devilbiss Kk-4990 Agitator Conversion Kit. This kit is designed to convert compatible compressor or...

Devilbiss MBC-510 Manual Spray Gun (MBC Without Head) This Devilbiss MBC-510 Manual Spray Gun (MBC Without Head) (MBC series) is built for high-output industrial spraying applications from the trusted Binks/DeVilbiss line. This version is supplied...

Dewalt 1-1/8" SDS Plus Rotary Hammer Kit The DEWALT D25263K 1-1/8" SDS Plus Rotary Hammer is a high-performance, corded drilling solution engineered for concrete and masonry applications. Powered by a robust 8.5-amp motor, this rotary hammer delivers up...

DeWalt 1-3/4" SDS MAX Combination Rotary Hammer Kit This DeWalt 1-3/4" SDS MAX Combination Rotary Hammer Kit D25614K is a professional-grade corded rotary hammer designed to tackle heavy-duty concrete and masonry work — from anchor drilling to...

DeWalt 12 Amp Reciprocating Saw The DeWalt DWE305 is a corded 12-amp reciprocating saw made for cutting wood, metal, drywall, plastic, and other common jobsite materials. It has a variable-speed trigger that reaches up to 2,900 strokes per minute and a...

Dewalt 14" Chop Saw 15 Amp Heavy Duty Metal Cut Off Saw Specifications / Features Brand: Dewalt Model: D28715 Product Type: 14" Chop Saw / Cut-Off Saw Motor: 15 Amp / Approx. 5.5 HP peak Blade Size: 14 Inch Abrasive Wheel No Load Speed:...

Dewalt 15-Amp 7-1/4" Worm Drive Circular Saw w/ Electric Brake This is the DEWALT 15-Amp 7-1/4″ Worm Drive Circular Saw (Model DWS535B) the professional-grade corded saw. It delivers strong cutting power and durability for framing, lumber, and...

DeWalt 19 Lb SDS MAX L-Shape Demolition Hammer The DeWalt D25891K 19 lb SDS MAX L-Shape Demolition Hammer is a heavy-duty corded demolition tool engineered for professional concrete and masonry breaking. With a robust German-engineered mechanism...

Dewalt 20V Max XR Brushless Deep Cut Band Saw Features & Specifications 20V MAX* XR Brushless Motor for long runtime and performance. 5" deep cutting capacity (rectangular up to 5" x 4-3/4"; round up to 4"). Variable speed control for precision...

DeWalt 6" Cut-Off Grinder No-Lock Paddle Switch The DeWalt DWE46144N is a powerful 6" cut-off grinder built for demanding metal-cutting applications. Its 13-amp motor delivers fast 9,000 RPM performance, while the no-lock paddle switch provides increased...

DeWalt 7" x 1/4" x 5/8-11 Metal Grinding Wheel Specifications / Features Brand: DeWalt Model / SKU: DW4999 Disc Diameter: 7 inches Thickness: 1/4 inch Arbor Size: 5/8-11 threaded arbor Wheel Type: Type 27 depressed-center grinding...

Diamatic Contra Pulley For Floor Grinding Equipment The Diamatic DIA-BG007866 Contra Pulley is an OEM replacement drive component engineered for Diamatic floor grinding and surface preparation equipment. This contra pulley is designed to maintain proper...

Diamatic MPS-1027E 230V Industrial Floor Burnisher The Diamatic MPS-1027E 230V Industrial Floor Burnisher is a heavy-duty, professional grade concrete burnishing and micro-polishing machine designed for use in commercial and industrial environments...

Diamond Tec 7" x 15" Wet Core Bit The 7" x 15" Wet Core Bit from Diamond Tec Enterprises is engineered for high-performance wet drilling in concrete, reinforced concrete, brick, and masonry applications. Specifications /...

Diamond Vantage WP-DPLATE 18″ Pad Driver for Wing Pad Upgrade your polishing setup with this Diamond Vantage WP-DPLATE 18″ Pad Driver, engineered to deliver smooth and consistent performance with wing pads on floor sanders and...

Dittmer Manufacturing Blast Hose Assembly, 1-1/4" ID Superflex 100' With Nylon Couplings Heavy-duty abrasive blasting hose assembly designed for rugged industrial sandblasting applications. This 100-foot Superflex blast hose features a 1-1/4″ inner...

Double 1/4 Round PCD w/ #18 Grit (Set Of 9) This Double 1/4 Round PCD W/18 Grit Set Of 9 is engineered for aggressive removal of thick coatings and surface materials where standard diamond tools often struggle. The PCD...

Double Male Nipple 1/4 In NPT Brass Fitting For Wagner Sprayers This Double Male Nipple (SKU 51-239) is a precision-engineered brass fitting designed as an accessory part for Wagner and compatible spray systems. Ideal for connecting two female-threaded...

Dri-Eaz 12 Inch Exhaust Vent Hose Ducting F405 The Dri-Eaz F405 12" Exhaust Vent Hose is designed for high-efficiency air movement and ventilation in restoration, remediation, and construction environments. Built to attach to compatible Dri-Eaz...

DuPont Tychem 2000 Protect yourself in demanding chemical handling environments with this heavy-duty DuPont Tychem 2000 QC122SYL coverall. Designed for reliable splash protection and durability, it provides up to 30 minutes of barrier protection against...

DuPont Tychem 4000 Hooded Coverall w/Socks White XL (Box of 6) Specifications / Feature DuPont Tychem 4000 chemical-resistant hooded coverall Material: 12 mil Tychem 4000 Standard-fit attached hood Attached socks for added lower-leg...

Dupont Tychem Chemical Resistant Coverall w/ Hood - 2XL (Case of 12) The DuPont Tychem® 2000 Chemical Resistant Coverall (SKU QC127S-2XL) is a dependable disposable protective garment designed to provide reliable barrier protection against...

DuPont Tyvek 400 Two Pocket Lab Coat Large (30-Pack) The ORS Nasco LLC (SKU: 251-TY212S-L) is a DuPont™ Tyvek® 400 Two Pocket Lab Coat designed for disposable protective use in laboratory and industrial environments. Constructed from...

DuPont Tyvek 400 Two Pocket Lab Coat X-Large (30-Pack) The DuPont Tyvek 400 Two Pocket Lab Coat (SKU: 251-TY212S-XL) is a high-quality disposable protective garment designed to offer an excellent balance of comfort, durability, and barrier performance...

Dwyer Instruments 6 Channel 120V Timer Board w/ Weatherproof Enclosure The Dwyer Instruments DCT506A-WP is a rugged and reliable low-cost 6-channel timer controller designed for industrial automated cleaning systems such as dust collectors and pneumatic...

E-Box NEMA 12 Steel Hinged Gray Junction Box Enclosure 16" X 14" X 6" Features & Specifications Brand: E-Box Part Number: JH16146N412 Product Type: Wall-Mount Hinged Junction Box Enclosure Enclosure Size: 16 In. H x 14 In. W x 6 In. D NEMA Rating:...

Eagle Dust Collector Ducting 18 In. X 25 Ft. 2-Ply Heavy Duty Specifications / Features SKU: DUC-D2-18 Product Type: Dust collector ducting / flexible industrial dust hose Size: 18 in. diameter x 25 ft. length Construction: 2-ply...

Eagle Industries 12 Mil 20 Ft X 100 Ft White Flame-Retardant Heat Shrink Wrap Premium industrial-grade heat shrink wrap film designed to protect structures, equipment, and assets in construction, marine, industrial, and transportation applications. This...

Eagle Industries 12″ Square To Round Fan Transition Adapter BMA-12 12″ Square-to-Round Transition Adapter For Fan To Ducting Connection Durable Black Steel Construction Designed For Industrial Use Direct Fit For Black Max Series Ventilation...

Eagle Industries 15' X 25' Black 85% Mesh Non-Flame Retardant Screen 15' x 25' containment screen 85% black mesh material Non-flame-retardant construction Woven polypropylene mesh Designed for abrasive blasting, paint overspray, dust, debris, and...

Eagle Industries Black Max 20″ Industrial TEAO Electric Ventilation Fan The Eagle Industries Black Max 20″ Industrial Ventilation Fan (Model BMM-20P) is a heavy-duty, high-volume air mover designed for rugged...