Spears
Schedule 80 PVC Van Stone Flange Table Spigot DE
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 80 PVC Van Stone Flange Table Spigot DE
Schedule 80 PVC Van Stone Flange Table Spigot DE provides a spigot-to-flanged transition for compatible Schedule 80 PVC piping arrangements. The spigot connection is designed to join with an appropriately sized compatible receiving socket, while the Van Stone flange configuration provides the mechanical interface needed for connection to a compatible mating flange.
The Table Spigot DE configuration combines a Schedule 80 PVC spigot connection with a Van Stone-style flange arrangement for installations requiring this specific flange configuration. Selection should account for nominal size, receiving socket compatibility, mating flange requirements, flange alignment, gasket selection, adjoining piping support, service conditions, and available installation clearance.
Product Highlights
- PVC construction
- Spigot connection
- Schedule 80 design
- Van Stone flange design
- Table Spigot DE configuration
- Provides a socket-to-flange transition
- Connects compatible PVC piping to a flange interface
- Supports flanged transitions within Schedule 80 PVC piping layouts
Technical Specifications
| Product Type | Van Stone Flange |
|---|---|
| Material | PVC |
| Schedule | Schedule 80 |
| Connection | Spigot (SPG) |
| Flange Style | Van Stone |
| Configuration | Table Spigot DE |
| Spigot Interface | Compatible Receiving Socket |
| Connection Style | Spigot x Flange |
| Pipe Joining Method | Compatible PVC Solvent-Cement Joining |
| Flange Joining Method | Bolted Mechanical Connection |
| Piping Configuration | Spigot-to-Flange Transition |
| Primary Function | Transition Compatible Schedule 80 PVC Piping to a Flanged Connection |
Van Stone Flange Design
The Van Stone flange configuration provides a flanged connection arrangement for joining compatible PVC piping to a mating flanged component. The design separates the piping-side spigot connection from the bolted flange interface, allowing each portion of the fitting to perform a distinct function within the completed piping assembly.
This configuration is useful where a Schedule 80 PVC piping run must transition to compatible flanged equipment, valves, fittings, or adjoining piping components. Proper planning of the flange position helps coordinate the mating connection, gasket placement, fastener access, adjoining pipe alignment, and surrounding installation space.
Spigot Connection
The spigot connection provides an exterior joining surface designed to fit into an appropriately sized compatible receiving socket. This allows the piping side of the flange assembly to connect through a PVC solvent-cement joint while the opposite side provides the mechanical flange connection.
The spigot and receiving socket surfaces should be prepared using installation practices appropriate for the PVC piping system. Compatible joining materials, adequate insertion, correct alignment, and careful positioning help establish the piping connection without relying on the flange assembly to compensate for improperly aligned adjoining components.
Table Spigot DE Configuration
The Table Spigot DE configuration identifies the specific flange arrangement associated with this product and should be matched to the requirements of the intended mating connection. Confirming the required flange configuration before ordering is important because flange dimensions and connection arrangements must correspond with the adjoining system components.
The mating flange, gasket, and fastener arrangement should be reviewed as a complete assembly before installation begins. Verifying these components in advance helps prevent compatibility issues at the jobsite and provides adequate space for bolt installation, gasket positioning, flange alignment, and future access around the completed connection.
Schedule 80 PVC Integration
A Schedule 80 PVC Van Stone Flange Table Spigot DE provides a transition point where compatible socket-connected PVC piping must interface with a flanged component. The spigot connection establishes the PVC piping side while the flange portion provides the mechanical connection required at the adjoining flanged assembly.
Application suitability should be evaluated using the requirements of the complete piping system rather than the Schedule 80 designation alone. Service conditions, receiving socket compatibility, mating flange configuration, gasket selection, joining materials, piping support, installation environment, and applicable practices should all be considered during selection.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the DE configuration.
- Check Schedule 80 PVC compatibility.
- Match the spigot to the receiving socket.
- Confirm the mating flange configuration before ordering.
Our PVC fitting specialists can help review your nominal size, Schedule 80 requirements, Table Spigot DE configuration, receiving socket, mating flange requirements, gasket selection, bolt alignment, adjoining piping support, service conditions, and available installation clearance before you order.
Frequently Asked Questions
What is this Schedule 80 PVC Van Stone Flange used for?
It provides a transition between compatible Schedule 80 PVC piping and a mating flanged component using a spigot piping connection.
What does spigot mean?
Spigot identifies an exterior connection surface designed to fit into an appropriately sized compatible receiving socket.
What does the spigot connect to?
The spigot connection fits into an appropriately sized compatible receiving socket for the applicable PVC joining procedure.
What is a Van Stone flange?
A Van Stone flange provides a flanged connection arrangement that separates the piping-side hub from the mechanical flange interface.
What does Table Spigot DE identify?
It identifies the specific flange and spigot configuration of this product and should be matched to the requirements of the intended mating connection.
How is the spigot connection assembled?
The spigot and compatible receiving socket are assembled using the appropriate PVC solvent-cement preparation and joining procedure.
Important Ordering & Installation Notes
- Inspect the spigot before use.
- Center the gasket before bolting.
- Prepare the receiving socket correctly.
- Align mating flange faces before assembly.
- Support adjoining piping independently of the flange.
