Spears
Schedule 80 CPVC EPDM Union (Socket x Socket)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 80 CPVC EPDM Union (Socket x Socket)
Schedule 80 CPVC EPDM Union (Socket x Socket) provides a serviceable connection between compatible Schedule 80 CPVC pipe sections. The fitting uses socket connections on both ends with an EPDM sealing element at the removable center union joint.
The Schedule 80 CPVC EPDM Union allows the piping connection to be separated for maintenance, equipment access, or system changes without cutting adjoining CPVC pipe. Selection should account for nominal size, socket compatibility, EPDM seal compatibility, system conditions, and proper CPVC solvent-cement joining procedures.
Product Highlights
- CPVC construction
- Schedule 80 design
- Serviceable union configuration
- Socket x Socket connections
- EPDM sealing element
- Two solvent-cement interfaces
- Designed for compatible CPVC pipe
- Allows disassembly without cutting adjoining piping
Technical Specifications
| Product Type | Union |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Configuration | Socket Union |
| Connection | Socket (SOC) x Socket (SOC) |
| Socket Interface | Compatible CPVC Pipe |
| Connection Count | Two End Connections |
| Seal Material | EPDM |
| Joining Method | CPVC Solvent-Cement Connections with Serviceable Union Joint |
| Primary Function | Provide a Serviceable Connection Between Compatible CPVC Pipe Sections |
Union Design
The union design provides a removable center joint between two socket ends. This creates a service point that allows adjoining CPVC piping to be separated without cutting the pipe.
The fitting should be positioned where the union joint remains accessible after installation. Proper alignment should be maintained so the joint can be assembled and serviced without unnecessary mechanical stress.
Socket Connections
The socket connections accept appropriately sized compatible CPVC pipe at both ends. These interfaces use solvent-cement joining to integrate the union into the piping system.
Pipe ends and fitting sockets should be clean and properly prepared before assembly. Compatible CPVC primer, solvent cement, insertion procedures, and required cure times should be followed.
EPDM Seal
The EPDM sealing element provides the seal at the removable center union joint. The seal should remain clean, properly positioned, and free from visible damage during assembly.
EPDM compatibility should be reviewed against the fluid and operating conditions of the intended piping system. The sealing element should also be inspected whenever the union is opened for service.
Serviceable Socket Connection
A Schedule 80 CPVC EPDM Union Socket x Socket provides a convenient separation point within compatible CPVC piping. The center joint can be disconnected while both solvent-cement socket ends remain installed.
System temperature, pressure, fluid compatibility, joining requirements, and applicable installation procedures should be reviewed for the intended application. Proper support should be maintained on both sides of the union.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify both socket connections.
- Confirm EPDM seal compatibility.
- Provide access to the union joint.
- Maintain proper piping alignment.
Our piping specialists can help review nominal size, socket compatibility, EPDM seal requirements, service access, adjoining CPVC pipe, and installation considerations before you order.
Frequently Asked Questions
What is a Schedule 80 CPVC EPDM Union Socket x Socket used for?
It provides a serviceable connection between compatible CPVC pipe sections.
What does Socket x Socket mean?
It means the union has socket connections on both ends for compatible CPVC pipe.
What type of seal does this union use?
This union uses an EPDM sealing element at the removable center joint.
Can the union be disconnected after installation?
Yes. The center union joint can be separated while both socket end connections remain installed.
How are the socket connections installed?
The socket ends are designed for compatible CPVC solvent-cement joining using appropriate preparation, joining materials, and cure procedures.
What should I confirm before ordering?
Confirm nominal size, Socket x Socket configuration, EPDM compatibility, adjoining CPVC pipe size, and system requirements.
Important Ordering & Installation Notes
- Confirm the nominal size.
- Verify both socket connections.
- Confirm EPDM compatibility.
- Inspect the seal before assembly.
- Use compatible CPVC joining procedures.
