Description
Schedule 80 CPVC 90° Elbow (FPT)
Schedule 80 CPVC 90° Elbow (FPT) provides a 90-degree direction change between compatible male-threaded piping components. The Female Pipe Thread configuration uses threaded connections on both ends for a compact right-angle transition.
The Schedule 80 CPVC threaded 90° elbow combines durable CPVC construction with two female-threaded interfaces. Selection should account for nominal size, male-thread compatibility, elbow orientation, system requirements, and proper threaded plastic-piping installation procedures.
Product Highlights
- CPVC construction
- Schedule 80 design
- 90° elbow configuration
- Two FPT connections
- Female-threaded interfaces
- Provides a 90° direction change
- Accepts compatible male-threaded components
- Designed for threaded Schedule 80 CPVC piping
Technical Specifications
| Product Type | 90° Elbow |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Configuration | Threaded 90° Elbow |
| Connection | Female Pipe Thread (FPT) x Female Pipe Thread (FPT) |
| Thread Interface | Compatible Male Pipe Thread |
| Direction Change | 90° |
| Connection Count | Two Connections |
| Joining Method | Threaded Connections |
| Primary Function | Provide a 90° Direction Change Between Compatible Male-Threaded Components |
90° Elbow Design
The 90° elbow design changes the direction of the piping path by a right angle while maintaining threaded connections at both ends. This allows compatible male-threaded components to connect through one molded Schedule 80 CPVC fitting.
Nominal thread size and elbow orientation should be confirmed before installation. Proper alignment helps reduce unnecessary mechanical stress on the threaded CPVC connections.
Female Threaded Connections
The Female Pipe Thread connections accept appropriately sized compatible male-threaded components at both ends of the elbow. This provides a fully threaded connection without solvent-cement socket joints.
Threads should be clean and properly aligned before assembly. Appropriate threaded plastic-piping procedures and compatible sealing materials should be used while avoiding excessive tightening.
90° Direction Change
The 90-degree configuration provides a compact perpendicular change in piping direction. This allows threaded piping to turn around equipment, structural elements, or other installation constraints.
Proper support should be provided to the adjoining components so external loads are not transferred to the elbow. Installation clearance should also be confirmed before assembly.
Schedule 80 CPVC Application
A Schedule 80 CPVC FPT 90° Elbow provides a molded threaded directional connection for compatible piping systems. Its two female-threaded interfaces allow male-threaded components to connect at both ends.
System temperature, pressure, fluid compatibility, thread compatibility, and applicable installation requirements should be reviewed for the intended application. Excessive tightening should be avoided to minimize stress on the fitting.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify both FPT connections.
- Confirm male-thread compatibility.
- Check elbow orientation before assembly.
- Avoid excessive threaded tightening.
Our piping specialists can help review nominal size, Female Pipe Thread connections, mating component compatibility, elbow orientation, and installation requirements before you order.
Frequently Asked Questions
What is a Schedule 80 CPVC FPT 90° Elbow used for?
It provides a 90-degree direction change between compatible male-threaded piping components.
What does FPT mean?
FPT means Female Pipe Thread and identifies an internally threaded connection designed to accept a compatible male pipe thread.
How many threaded connections does this elbow have?
The fitting has two Female Pipe Thread connections, one at each end of the 90-degree elbow.
Does this elbow use solvent cement?
No. The FPT configuration uses threaded connections rather than solvent-cement socket joints.
How should the threaded connections be installed?
Use appropriate threaded plastic-piping procedures and compatible sealing materials while avoiding excessive tightening.
What should I confirm before ordering?
Confirm nominal size, FPT configuration, mating male-thread compatibility, Schedule 80 CPVC requirements, and elbow orientation.
Important Ordering & Installation Notes
- Confirm the nominal size.
- Verify both FPT connections.
- Confirm male-thread compatibility.
- Check orientation before assembly.
- Avoid excessive tightening of CPVC threads.
