Spears
Schedule 40 PVC S/O 90° Elbow Socket (SOC)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 40 PVC S/O 90° Elbow Socket (SOC)
Schedule 40 PVC S/O 90° Elbow Socket (SOC) provides a 90-degree change in direction for compatible Schedule 40 PVC piping using socket-style connections. The socket openings receive appropriately sized compatible PVC pipe, allowing the fitting to establish a right-angle transition within the piping layout.
The S/O 90° elbow configuration combines a right-angle directional change with socket connections for integration into compatible PVC piping arrangements. Selection should account for nominal size, Schedule 40 PVC compatibility, socket positions, required direction change, adjoining pipe alignment, joining requirements, piping support, and available installation clearance.
Product Highlights
- PVC construction
- Socket connections
- Schedule 40 design
- 90° elbow configuration
- Provides a right-angle transition
- Connects compatible PVC pipe sections
- Designed for compatible PVC solvent-cement joining
- Redirects Schedule 40 PVC piping through a 90° change in direction
Technical Specifications
| Product Type | S/O 90° Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 40 |
| Connection | Socket (SOC) |
| Connection Count | Two |
| Fitting Configuration | 90° Elbow |
| Connection Interface | Compatible PVC Pipe |
| Connection Style | Socket x Socket |
| Joining Method | Compatible PVC Solvent-Cement Joining |
| Direction Change | 90° |
| Piping Configuration | Right-Angle Directional Transition |
| Primary Function | Change Direction of Compatible Schedule 40 PVC Piping by 90° |
90° Elbow Design
The 90° elbow configuration redirects compatible PVC piping through a right-angle change in direction within a single fitting. This configuration is suited to piping layouts where the run must turn 90 degrees while maintaining socket-style connections to the adjoining PVC pipe.
The intended elbow orientation should be established before permanent joining so both adjoining pipe sections align with their respective sockets. Planning the fitting position in advance helps coordinate pipe lengths, nearby fittings, support locations, and available working clearance throughout the completed piping arrangement.
Socket Connections
The socket connections provide receiving interfaces for appropriately sized compatible PVC pipe. Each adjoining pipe section should approach its socket in proper alignment so the fitting can establish the intended 90-degree direction change without being forced into an offset piping arrangement.
The mating pipe and socket surfaces should be prepared using installation practices appropriate for the PVC piping system. Compatible joining materials, adequate insertion, correct elbow orientation, and orderly assembly help establish the connections while reducing unnecessary mechanical stress on the fitting and adjoining piping.
Schedule 40 PVC Integration
The Schedule 40 PVC construction allows the elbow to integrate into compatible Schedule 40 PVC piping arrangements requiring a right-angle directional transition. Matching the nominal size and socket configuration to the adjoining PVC pipe helps maintain the intended connection arrangement throughout the piping run.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, joining materials, installation environment, piping support, and applicable practices should all be considered during elbow selection.
Right-Angle Piping Transition
A Schedule 40 PVC S/O 90° Elbow provides a compact way to redirect a compatible piping run through a 90-degree turn. The socket connection arrangement allows compatible PVC pipe to connect directly to the fitting on both sides of the directional transition.
Installation planning should consider the required angle, adjoining pipe lengths, socket insertion, nearby fittings, available clearance, and independent support for the piping. Both connected pipe sections should align naturally with the elbow so the fitting is not relied upon to correct improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the required 90° direction change.
- Check Schedule 40 PVC compatibility.
- Confirm the required socket connections.
- Match the elbow orientation to the piping layout.
Our PVC fitting specialists can help review your nominal size, Schedule 40 requirements, socket connections, required 90° direction change, adjoining PVC pipe, fitting orientation, joining requirements, piping layout, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 40 PVC S/O 90° Elbow used for?
It changes the direction of compatible Schedule 40 PVC piping by 90 degrees using socket-style connections.
What does SOC mean?
SOC identifies a socket-style connection designed to receive appropriately sized compatible PVC pipe.
How much does this elbow change the piping direction?
The elbow provides a 90-degree change in direction between the connected PVC pipe sections.
What connects to the socket openings?
The socket openings receive appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
Why is elbow orientation important?
The elbow should be positioned so the connected pipe sections follow the intended 90-degree piping route without forcing the assembly out of alignment.
How are the socket connections assembled?
Compatible PVC pipe is joined using the appropriate PVC solvent-cement preparation and assembly procedure for the installation.
Important Ordering & Installation Notes
- Inspect the sockets before use.
- Prepare each pipe end correctly.
- Set the elbow orientation before cementing.
- Use compatible PVC joining materials throughout.
- Support adjoining piping after completing the assembly.
