Description
Schedule 40 PVC 90° Elbow Socket (SOC)
Schedule 40 PVC 90° Elbow Socket (SOC) provides a 90-degree change in direction between compatible Schedule 40 PVC pipe sections. The socket connections receive appropriately sized compatible PVC pipe at both ends while the elbow establishes the required right-angle transition.
The 90° elbow configuration combines a right-angle directional change with socket connections on both ends. Selection should account for nominal size, Schedule 40 PVC compatibility, required 90° routing change, adjoining PVC pipe, socket joining requirements, fitting orientation, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- Socket connections
- Schedule 40 design
- 90° elbow configuration
- Provides a right-angle transition
- Connects compatible PVC pipe sections
- Designed for compatible PVC solvent-cement joining
- Redirects Schedule 40 PVC piping through a 90° change in direction
Technical Specifications
| Product Type | 90° Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 40 |
| Connection | Socket (SOC) |
| Connection Count | Two |
| Fitting Configuration | 90° Elbow |
| Connection Interface | Compatible PVC Pipe |
| Connection Style | Socket x Socket |
| Joining Method | Compatible PVC Solvent-Cement Joining |
| Direction Change | 90° |
| Piping Configuration | Right-Angle Directional Transition |
| Primary Function | Change Direction of Compatible Schedule 40 PVC Piping by 90° |
90° Elbow Design
The 90° elbow configuration redirects compatible PVC piping through a right-angle transition. Socket connections on both ends allow appropriately sized compatible PVC pipe sections to connect directly to the fitting.
The intended elbow orientation should be established before permanent joining so the adjoining pipe follows the required routing. Planning the fitting position in advance helps coordinate pipe lengths, nearby fittings, piping supports, and available working clearance.
Socket Connections
The socket connections receive appropriately sized compatible PVC pipe at both ends of the elbow. This socket arrangement provides a consistent connection style while the fitting establishes the required 90-degree directional transition.
The mating surfaces should be prepared using the appropriate PVC solvent-cement joining procedure for the installation. Compatible joining materials, proper insertion, correct alignment, and planned elbow orientation help establish the connections without placing unnecessary stress on the fitting.
Schedule 40 PVC Integration
The Schedule 40 PVC construction allows the elbow to integrate into compatible Schedule 40 PVC piping arrangements requiring a 90-degree directional transition. Matching the nominal size and socket connections to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, joining materials, installation environment, piping support, and applicable practices should all be considered during fitting selection.
Right-Angle Piping Transition
A Schedule 40 PVC 90° Elbow provides a direct right-angle transition where compatible PVC piping must change routing by 90 degrees. The socket configuration allows compatible pipe to connect at both ends while the fitting establishes the required directional change.
Installation planning should consider socket insertion, elbow orientation, adjoining pipe alignment, nearby fittings, available clearance, and piping support. Connected pipe should align naturally with the elbow so the fitting is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the required 90° change.
- Check Schedule 40 PVC compatibility.
- Confirm both required socket connections.
- Match the elbow orientation to the piping layout.
Our PVC fitting specialists can help review your nominal size, Schedule 40 requirements, socket connections, required 90° direction change, adjoining PVC pipe, joining requirements, elbow orientation, piping layout, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 40 PVC 90° Elbow used for?
It changes the direction of compatible Schedule 40 PVC piping by 90 degrees while maintaining socket connections at both ends.
What does SOC mean?
SOC identifies a socket-style connection designed to receive appropriately sized compatible PVC pipe.
How much does this elbow change the piping direction?
The elbow redirects the compatible piping arrangement through a 90-degree change in direction.
What connects to the socket openings?
Both socket openings receive appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
Do both ends use the same connection type?
Yes. Both ends use socket-style connections designed for compatible PVC pipe.
What should I confirm before ordering?
Confirm the nominal size, Schedule 40 PVC compatibility, socket connection arrangement, and required 90-degree piping transition.
Important Ordering & Installation Notes
- Inspect both sockets before use.
- Confirm the nominal connection size.
- Prepare each pipe end correctly.
- Set the elbow orientation before cementing.
- Use compatible PVC joining materials throughout.
