Description
Schedule 40 PVC Cap (FPT)
Schedule 40 PVC Cap (FPT) provides a threaded closure for compatible PVC piping systems. The Female Pipe Thread connection accepts an appropriately sized male threaded component, providing a compact method of terminating a threaded piping connection.
The Female Pipe Thread cap configuration is designed for applications requiring a threaded end closure rather than a solvent-cement socket connection. Selection should account for nominal size, Schedule 40 PVC compatibility, mating male thread size, intended service conditions, piping alignment, compatible thread-sealing practices, and available installation clearance.
Product Highlights
- PVC construction
- Schedule 40 design
- Threaded cap configuration
- Female Pipe Thread connection
- Provides a threaded pipe-end closure
- Accepts a compatible male threaded component
- Allows installation without a solvent-cement socket joint
- Provides a compact termination for compatible threaded PVC piping
Technical Specifications
| Product Type | Cap |
|---|---|
| Material | PVC |
| Schedule | Schedule 40 |
| Configuration | Threaded Cap |
| Connection | Female Pipe Thread (FPT) |
| Thread Interface | Compatible Male Pipe Thread |
| Joining Method | Threaded Connection |
| Connection Count | Single Connection |
| Cap Function | Threaded Pipe-End Termination |
| Primary Function | Close a Compatible Male Threaded Piping Connection |
Threaded Cap Design
The threaded cap configuration provides a closed-end fitting for terminating an appropriately sized compatible male threaded connection. Its internal Female Pipe Thread allows the cap to thread directly onto the mating component without requiring a socket-style solvent-cement joint.
This arrangement provides a compact solution where a threaded termination is required within a compatible PVC piping system. Nominal size, thread compatibility, adjoining components, and intended service conditions should be confirmed before ordering.
Female Threaded Connection
The Female Pipe Thread connection provides the internally threaded interface of the cap and accepts an appropriately sized compatible male threaded component. The mating component should have the correct nominal size and compatible thread configuration before assembly.
Threaded PVC connections should be assembled carefully using compatible sealing materials and appropriate installation practices. Excessive tightening should be avoided to help minimize unnecessary mechanical stress on the PVC cap.
Threaded Pipe-End Termination
The closed cap design provides a termination point at the end of a compatible male threaded piping connection. Unlike a socket cap, the FPT configuration uses a threaded interface and does not require a solvent-cement joint at the cap connection.
The cap and mating component should align naturally during installation. Adjoining piping should also be properly supported so the threaded connection is not subjected to unnecessary bending, pulling, or other mechanical stress.
Compact PVC Closure
A Schedule 40 PVC FPT Cap provides a straightforward and space-efficient method of closing a compatible male threaded connection. Its single female threaded interface allows the cap to be installed directly onto the appropriately sized mating component.
Application suitability should be evaluated using the requirements of the complete piping system rather than the Schedule 40 designation alone. Nominal size, thread compatibility, adjoining components, service conditions, piping support, system alignment, and applicable installation practices should all be considered during selection.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the FPT configuration.
- Check Schedule 40 PVC compatibility.
- Confirm the mating male threaded component.
- Avoid excessive tightening during installation.

Our PVC fitting specialists can help review nominal size, Schedule 40 requirements, Female Pipe Thread configuration, mating male threaded components, intended service conditions, thread compatibility, piping support, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 40 PVC FPT Cap used for?
It provides a closed termination for an appropriately sized compatible male threaded connection within a PVC piping system.
What does FPT mean?
FPT means Female Pipe Thread, indicating that the cap has an internally threaded connection.
What connects to the FPT cap?
The Female Pipe Thread connection accepts an appropriately sized compatible male threaded component.
Does this cap require solvent cement?
No solvent-cement socket joint is used at the FPT connection. The cap connects through its female threaded interface.
Should a PVC threaded cap be tightened heavily?
No. Threaded PVC components should be assembled carefully, and excessive tightening should be avoided to help minimize stress on the fitting.
What should I confirm before ordering?
Confirm nominal size, Schedule 40 PVC requirements, FPT configuration, mating male thread compatibility, service requirements, and installation conditions.
Important Ordering & Installation Notes
- Confirm the nominal size.
- Verify the FPT configuration.
- Inspect the threads before assembly.
- Confirm compatibility with the mating male thread.
- Avoid excessive tightening during installation.