Merit Brass
Schedule 10 304L Stainless Steel Welded Pipe
- SKU:
- SPS10T4L
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Shipping Notice:
- LTL Only
Description
Schedule 10 304/304L Stainless Steel Welded Pipe - 20' Lengths
Schedule 10 304/304L Stainless Steel Welded Pipe provides a lightweight stainless piping option for welded process, mechanical, and industrial piping systems. Supplied in 20-foot lengths, this pipe is manufactured to ASTM A312 / ASME SA312 requirements and is intended for use with compatible welded fittings and piping components.
Schedule 10 has a thinner wall than heavier schedules, helping reduce pipe weight while maintaining the corrosion resistance and fabrication advantages associated with 304/304L stainless steel. Because this is welded pipe, a longitudinal weld seam is present in the pipe construction.
Product Highlights
- 304/304L stainless steel welded pipe
- Schedule 10 wall thickness
- 20-foot standard lengths
- ASTM A312 / ASME SA312
- Grade 304L
- Welded pipe construction
- Designed for welded piping systems
- Lightweight compared with heavier pipe schedules
- Suitable for use with compatible stainless steel weld fittings
- Pipe diameter and wall thickness chart available below
- Available for Will-Call from six distribution centers
Schedule 10 Construction
Schedule 10 stainless steel pipe uses a relatively thin wall compared with heavier schedules such as Schedule 40 or Schedule 80. This lowers the overall weight of the pipe and can simplify handling and installation where Schedule 10 is appropriate for the application.
Actual wall thickness varies by nominal pipe size. Always verify the required pipe diameter and wall thickness for the selected size before fabrication or installation.
Technical Specifications
| Product Type | Stainless Steel Welded Pipe |
|---|---|
| Material | 304/304L Stainless Steel |
| Grade | 304L |
| Schedule | Schedule 10 |
| Construction | Welded |
| Standard | ASTM A312 / ASME SA312 |
| Standard Length | 20 Feet |
| Connection Method | Field Welded to Compatible Pipe, Fittings, and Components |
| Primary Use | Industrial, Mechanical, and Process Piping |
304/304L Stainless Steel
304 Stainless Steel
- Widely used austenitic stainless steel grade
- Provides good general corrosion resistance
- Common in industrial and mechanical piping
- Suitable for many compatible process applications
- Readily fabricated and welded
304L Stainless Steel
- Low-carbon variation of 304 stainless steel
- Commonly specified for welded fabrication
- Provides good corrosion resistance
- Well suited to compatible welded piping systems
- Product is identified as Grade 304L
Welded Pipe Construction
This product uses welded pipe construction. The pipe is formed and longitudinally welded during manufacturing, resulting in a weld seam in the finished pipe.
Welded piping systems can provide strong, permanent connections when pipe and fittings are properly prepared and welded in accordance with the applicable welding procedure, piping code, and project requirements.
Why Choose Schedule 10 Stainless Pipe?
Reduced Weight
- Thinner wall than heavier pipe schedules
- Lower weight per foot
- Easier material handling in many installations
- Can reduce structural load compared with heavier schedules
- Useful where Schedule 10 meets system requirements
Welded System Compatibility
- Designed for welded piping assemblies
- Compatible with appropriately specified weld fittings
- Supports permanent piping connections
- Suitable for shop or field fabrication
- Common in stainless steel process piping
Schedule 10 vs. Heavier Pipe Schedules
Schedule 10
- Relatively thin wall
- Lower pipe weight
- Often easier to handle and fabricate
- Used where system design permits thinner-wall pipe
- This product configuration
Schedule 40 / Schedule 80
- Heavier wall construction
- Greater weight per foot
- Different pressure and mechanical characteristics
- May be specified for more demanding service conditions
- Wall thickness varies by nominal pipe size
Common Applications
Commercial & Mechanical Piping
- Mechanical piping systems
- Equipment piping
- Utility piping
- Fabricated stainless steel assemblies
- Compatible fluid piping applications
Industrial & Process Piping
- Process piping systems
- Industrial fabrication
- Plant utility systems
- Stainless steel distribution piping
- Applications requiring welded stainless pipe
Fabrication & Installation Guidance
- Confirm the required nominal pipe size before ordering.
- Verify Schedule 10 wall thickness for the selected nominal size.
- Confirm ASTM A312 / ASME SA312 requirements are appropriate for the project.
- Use compatible stainless steel weld fittings and piping components.
- Cut and prepare pipe ends using appropriate stainless steel fabrication practices.
- Use a qualified welding procedure appropriate for 304/304L stainless steel.
- Maintain proper fit-up and alignment before welding.
- Avoid contamination from carbon steel tools or fabrication surfaces where required.
- Support 20-foot pipe lengths appropriately during handling and installation.
- Confirm pressure, temperature, media, corrosion, and mechanical requirements before use.
- Installation should follow applicable piping codes, welding requirements, and project specifications.
20-Foot Pipe Lengths
This pipe is supplied in 20-foot lengths. Long pipe lengths require appropriate handling, storage, transportation, and jobsite planning.
Because of the shipping characteristics of full-length pipe, Will-Call may be the preferred fulfillment method for many orders.
Will-Call Availability
Available to Will-Call from any of Merit's six distribution centers:
- Reno, Nevada
- Dallas, Texas
- Birmingham, Alabama
- Cleveland, Ohio
- Houston, Texas
- Long Beach, California
Availability may vary by pipe size and location. Confirm stock and pickup location before traveling to the distribution center.
Important Ordering Notes
- Product is Schedule 10 304/304L stainless steel welded pipe.
- Grade identified as 304L.
- Conforms to ASTM A312 / ASME SA312 according to the supplied product information.
- Supplied in 20-foot lengths.
- Welded pipe construction includes a longitudinal weld seam.
- Confirm nominal pipe size and Schedule 10 wall thickness before ordering.
- Confirm pressure, temperature, media, and corrosion requirements for the intended application.
- Use appropriate stainless steel welding and fabrication practices.
- Full-length pipe requires appropriate handling and transportation.
- Available for Will-Call from Reno, Dallas, Birmingham, Cleveland, Houston, and Long Beach distribution centers.
- Confirm current inventory at the selected Will-Call location before pickup.
- Refer to the pipe chart for dimensional and wall thickness information.
Product Documents
Frequently Asked Questions
What grade of stainless steel is this pipe?
The supplied product information identifies the pipe as Grade 304L stainless steel and describes it as 304/304L stainless steel pipe.
What schedule is this pipe?
This pipe is Schedule 10.
How long is each piece?
Each standard pipe length is 20 feet.
Is this seamless or welded pipe?
This is welded stainless steel pipe.
What standards does the pipe meet?
The supplied product information identifies ASTM A312 / ASME SA312.
Is Schedule 10 thinner than Schedule 40?
Yes. Schedule 10 generally uses a thinner wall than Schedule 40 for the same nominal pipe size. Exact wall thickness should be verified using the pipe dimensional chart.
Can this pipe be welded to stainless steel fittings?
Yes. It is intended for compatible welded piping systems. Welding procedures, filler metal, preparation, and installation must be appropriate for the pipe material and application.
Does welded pipe have a seam?
Yes. Welded pipe is manufactured with a longitudinal weld seam as part of its construction.
Where can I find the pipe wall thickness?
Use the Pipe Chart: Diameters & Wall Thicknesses in the Product Documents section above.
Is this available for Will-Call?
Yes. The supplied information identifies Will-Call availability from the Reno, Dallas, Birmingham, Cleveland, Houston, and Long Beach distribution centers.
Can I pick up a full 20-foot length?
The product is supplied in 20-foot lengths and is listed as available for Will-Call. Confirm the selected size and inventory at your preferred distribution center before pickup.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
